MAX4250EUK+T
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4250 |
| Pin Count | 5 |
| Qualification Status | Not Qualified |
| Output Type | Push-Pull, Rail-to-Rail |
| Power Supplies | 5V |
| Number of Circuits | 1 |
| Current - Supply | 420μA |
| Slew Rate | 0.3V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 115 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2.4V~5.5V ±1.2V~2.75V |
| Bandwidth | 3MHz |
| Unity Gain BW-Nom | 3000 kHz |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 70μV |
| Current - Output / Channel | 68mA |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Power | NO |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
MAX4250EUK+T Overview
It is packaged in an SC-74A, SOT-753-case that protects the operational amplifiers from damage. Buffer amps of this type are called General Purpose-types. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. A total of 5 terminations have been reported in the past few weeks. It consists of a total of 5 pins in total. Please take in mind that op amp should be run at 5V. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. The op amp ic has an array of 5 pins on it. The mounting type that is recommended for this electrical part is Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . This op amp contains 1 circuits. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Push-Pull, Rail-to-Rail signals. A TAPE AND REEL-shaped amplifier is used to pack the buffer amps. A supply of 420μA or higher is recommended for use with this electronic part.
MAX4250EUK+T Features
5 Pins
supply voltage of 5V
Output Type: Push-Pull, Rail-to-Rail
MAX4250EUK+T Applications
There are a lot of Maxim Integrated MAX4250EUK+T Instrumentational OP Amps applications.
- Hand-held batteries
- Power transmission
- Signal filtering
- Mobile phone
- Gaming industry
- E-book readers
- Ultrasound transducers
- Automation control systems
- High input resistance broadband
- Voltage regulation circuit
