MAX4252ESA+

2 Channels 68mA per Channel 1pA 70 dB Instrumentational OP Amps 0.0001μA 2.75V 2.4V~5.5V ±1.2V~2.75V MAX4252 8 Pins 8-SOIC (0.154, 3.90mm Width)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX4252ESA+
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 718
Description: 2 Channels 68mA per Channel 1pA 70 dB Instrumentational OP Amps 0.0001μA 2.75V 2.4V~5.5V ±1.2V~2.75V MAX4252 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Number of Pins	8
Operating Temperature	-40°C~85°C
Packaging	Tube
Published	2011
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Matte Tin (Sn)
Subcategory	Operational Amplifier
Technology	BICMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	5V
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	MAX4252
Pin Count	8
Output Type	Push-Pull, Rail-to-Rail
Operating Supply Voltage	2.75V
Power Supplies	5V
Number of Channels	2
Operating Supply Current	420μA
Nominal Supply Current	400μA
Output Current	68mA
Slew Rate	0.3V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	70 dB
Current - Input Bias	1pA
Voltage - Supply, Single/Dual (±)	2.4V~5.5V ±1.2V~2.75V
Output Current per Channel	68mA
Input Offset Voltage (Vos)	70μV
Bandwidth	3MHz
Unity Gain BW-Nom	3000 kHz
Voltage Gain	116dB
Average Bias Current-Max (IIB)	0.0001μA
Low-Offset	YES
Frequency Compensation	YES
Supply Voltage Limit-Max	6V
Low-Bias	YES
Micropower	YES
Programmable Power	NO
Power	NO
Height	1.5mm
Length	5mm
Width	4mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

MAX4252ESA+ Overview

A 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. This is a General Purpose type op amp. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. A total of 8 terminations have been reported in the past few weeks. There are a total of 8 pins on this op amp. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. 8 pins are included on the operational amplifiers. The input offset voltage is 70μV. For this electrical component, Surface Mount is the recommended mounting type. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . This op amp can operate from a supply current at 420μA. 116dB should remain the voltage gain. There are a total of 2 channels available on the op amps. In addition to outputting Push-Pull, Rail-to-Rail signals, this op amp ic offers a number of other advantages. The operating supply voltage of instrumentation amplifier is rated 2.75V voltage.