MAX4252EUA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4252 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Push-Pull, Rail-to-Rail |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Current - Supply | 420μA |
| Slew Rate | 0.3V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 115 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2.4V~5.5V ±1.2V~2.75V |
| Bandwidth | 3MHz |
| Unity Gain BW-Nom | 3000 kHz |
| Average Bias Current-Max (IIB) | 0.0001μA |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 70μV |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Power | NO |
| Voltage Gain-Min | 10000 |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
MAX4252EUA+ Overview
Packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case, the buffer op amp is ready to use. The instrumentation amplifier in this picture is of the General Purpose-type. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. It is estimated that there will be at least 8 terminations this year. The pins on this board total to 8 in total. This linear amplifier should be powered by an 5V battery. Instrumentation amplifier is a part of Operational Amplifier. 8 pins are included on the operational amplifiers. This electronic part is best mounted with type Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. This op amp contains 2 circuits. Buffer amplifier produces Push-Pull, Rail-to-Rail signals, which is one of its many benefits. As a result, it is recommended that a power supply of 420μA be used with this electronic part. There are a maximum of 10000 voltage gains that can be conducted by this operational amplifier at its minimum voltage gain.
MAX4252EUA+ Features
8 Pins
supply voltage of 5V
Output Type: Push-Pull, Rail-to-Rail
MAX4252EUA+ Applications
There are a lot of Maxim Integrated MAX4252EUA+ Instrumentational OP Amps applications.
- Active probe
- Large motor controllers
- Automation control systems
- High gain DC amplifier
- Video amplifiers
- Cinema or auditorium audio system
- High speed sample
- Thermocouples
- Image computer boards
- Video conversion and routing
