MAX4253EBC-T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-WFBGA, CSPBGA |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4253 |
| Pin Count | 10 |
| Output Type | Push-Pull, Rail-to-Rail |
| Operating Supply Voltage | 2.75V |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Operating Supply Current | 420μA |
| Nominal Supply Current | 400μA |
| Output Current | 68mA |
| Slew Rate | 0.3V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2.4V~5.5V ±1.2V~2.75V |
| Output Current per Channel | 68mA |
| Input Offset Voltage (Vos) | 70μV |
| Gain Bandwidth Product | 3MHz |
| Unity Gain BW-Nom | 3000 kHz |
| Voltage Gain | 116dB |
| Average Bias Current-Max (IIB) | 0.0001μA |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Wideband | NO |
| Power | NO |
| Height Seated (Max) | 0.67mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX4253EBC-T Overview
In the package, you will find a 12-WFBGA, CSPBGA-case to contain the op amp ic. An op amp ic of the General Purpose type. Linear amplifier is delivered in a Tape & Reel (TR) case. There have been a total of 10 terminations over the past year. In this case, there are 10 pins on the board. Please take in mind that this instrumentation amplifier should be run at 5V. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. An 10-pin op amp ic is included in the package. The input offset voltage is 70μV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . Operational amplifier can operate supply current at 420μA. 116dB should be the voltage gain. This op amp ic has 2 circuits. A benefit of this op amp ic is that it outputs Push-Pull, Rail-to-Rail signals, which is one of the many advantages it has to offer. The operating supply voltage of the buffer op amp is rated at 2.75V. This linear amplifier pack is based on the TAPE AND REEL axis.
MAX4253EBC-T Features
10 Pins
supply voltage of 5V
116dB voltage gain
Output Type: Push-Pull, Rail-to-Rail
MAX4253EBC-T Applications
There are a lot of Maxim Integrated MAX4253EBC-T Instrumentational OP Amps applications.
- Inverse/same-phase proportional circuit
- Active probe
- Vehicle electronics
- Signal transformation
- Biopotential
- Signal filtering
- Test equipment
- E-book readers
- Fast A/D and D/A converters
- Video conversion and routing
