MAX4291EUK+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4291 |
| Pin Count | 5 |
| JESD-30 Code | R-PDSO-G5 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Circuits | 1 |
| Current - Supply | 100μA |
| Slew Rate | 0.2V/μs |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 15nA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V ±0.9V~2.75V |
| Gain Bandwidth Product | 500kHz |
| Unity Gain BW-Nom | 500 kHz |
| Average Bias Current-Max (IIB) | 0.09μA |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 400μV |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
MAX4291EUK+T Overview
The linear amplifier is packaged in a SC-74A, SOT-753 case which makes it easy for the consumer to handle. This is a General Purpose type op amp. A Tape & Reel (TR) case is used to deliver the buffer op amp. During the past two weeks, there have been close to 5 terminations. There are a total of 5 pins on this op amp. Please take in mind that this instrumentation amplifier should be run at 5V. This particular linear amplifier is a type of Operational Amplifier device, to be precise. The mounting type that is recommended for this electrical part is Surface Mount. With regard to operating temperature, this op amp functions well at -40°C~85°C. On this buffer amplifier, there are 1 circuits. On the output type, there are Rail-to-Rail different types of op amps. To run supply current of buffer amplifier under 100μA.
MAX4291EUK+T Features
5 Pins
supply voltage of 5V
Output Type: Rail-to-Rail
MAX4291EUK+T Applications
There are a lot of Maxim Integrated MAX4291EUK+T Instrumentational OP Amps applications.
- Biopotential
- Broadcasting
- Exponential operation circuits
- Power control
- Test equipment
- Signal transformation
- Fission chambers
- Large motor controllers
- Voltage regulation circuit
- Professional videography
