MAX4310ESA+
| Parameters | |
|---|---|
| Weight | 186.993455mg |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Applications | 2:1 Multiplexer-Amplifier |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 471mW |
| Technology | BIPOLAR |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4310 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Max Output Current | 95mA |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Channels | 2 |
| Number of Circuits | 1 |
| Analog IC - Other Type | VIDEO MULTIPLEXER |
| Operating Supply Current | 6.1mA |
| Slew Rate | 460V/μs |
| Voltage - Supply, Single/Dual (±) | 4V~10.5V ±2V~5.25V |
| Output Current per Channel | 95mA |
| Supply Type | Dual, Single |
| Input Offset Voltage (Vos) | 20mV |
| Bandwidth | 280MHz |
| Off-state Isolation-Nom | 82 dB |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
MAX4310ESA+ Overview
A Tube is used to package class d amplifier.8-SOIC (0.154, 3.90mm Width) package reduces space by providing access to class d amp.Because of audio amplifiers high performance, audio amplifier is an excellent choice for 2:1 Multiplexer-Amplifier.Mounting the board based on Surface Mount is the preferred method.Due to the use of 1 circuits, audio ic has a greater degree of flexibility.The base part number is MAX4310 and is used to audio amp.A pin count of 8 can be found on audio digital amplifier.A total of 8 terminations are present.Multiplexer or Switches includes this audio power amplifier.A 6.1mA supply current is used for operation.The board is constructed wamplifier ich 8 pins.It is recommended to operate at a temperature below 85°C.At least -40°C is recommended as the operating temperature.A total of 2 channels are available at the moment.Due to the 5V supply voltage, high efficiency is possible.As a mounting method, Surface Mount is used.If the supply voltage (Vsup) is not above 4V, the audio amplifier will not operate correctly.As of now, it has a supply type of Dual, Single.Analog ICs are used in this audio amplifier ic, which is VIDEO MULTIPLEXER.
MAX4310ESA+ Features
Multiplexer or Switches subcategory
8 pins
2 channels
MAX4310ESA+ Applications
There are a lot of Maxim Integrated MAX4310ESA+ Video Amps and Modules applications.
- Car Audio
- Telematics control unit
- Analog and Digital Mixing Consoles
- Body Control Modules
- HiFi Audio System Equipment
- Professional Audio Equipment
- Aftermarket telematics
- Automotive active noise cancellation
- High-Fidelity (HiFi) Headphone Drivers
- Microphone Preamplifiers
