MAX4310EUA
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Applications | 2:1 Multiplexer-Amplifier |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 330mW |
| Technology | BIPOLAR |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4310 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Channels | 2 |
| Number of Circuits | 1 |
| Analog IC - Other Type | VIDEO MULTIPLEXER |
| Operating Supply Current | 6.1mA |
| Output Current | 95mA |
| Slew Rate | 460V/μs |
| Voltage - Supply, Single/Dual (±) | 4V~10.5V ±2V~5.25V |
| Output Current per Channel | 95mA |
| Supply Type | Dual, Single |
| -3db Bandwidth | 280MHz |
| Off-state Isolation-Nom | 82 dB |
| Height | 950μm |
| Length | 3.1mm |
| Width | 3.1mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | Non-RoHS Compliant |
MAX4310EUA Overview
Tube is the package format.Consequently, class d amp is available in package 8-TSSOP, 8-MSOP (0.118, 3.00mm Width).It is an excellent choice for 2:1 Multiplexer-Amplifier because audio amplifier is highly efficient.Mounting audio power amplifier on the PCB is done using the Surface Mount method.A number of 1 circuits are utilized to enhance the audio ic's flexibility of the system.It has a base part number of MAX4310, which allows for easy identification of audio amp.On audio digital amplifier, there is a pin count of 8.A 8 termination is present on digital amplifier.Its -3db bandwidth is 280MHz.A copy of this audio power amplifier can be found in Multiplexer or Switches.Audio amplifier is powered by 6.1mA supply current.The circuamplifier ic is built using 8 pins.A temperature of less than 85°C should be used for operation.Temperatures of at least -40°C are recommended for operation.There are currently 2 channels available.The 5V supply voltage enables high efficiency.In order to mount it, Surface Mount is used.If the power supply (Vsup) is to operate normally, it must be above 4V.As a result, the output current is set to 95mA.Dual, Single is the supply type.During the assembly of this audio amp, it uses a analog IC, which is in this case set to VIDEO MULTIPLEXER.
MAX4310EUA Features
Multiplexer or Switches subcategory
8 pins
2 channels
MAX4310EUA Applications
There are a lot of Maxim Integrated MAX4310EUA Video Amps and Modules applications.
- Aftermarket telematics
- Emergency call (eCall)
- Microphone Preamplifiers
- Automotive
- High-End A/V Receivers
- Automotive external amplifier
- Body Control Modules
- Analog and Digital Mixing Consoles
- Car Audio
- Preamplification and Filtering
