MAX4315ESE
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Applications | 8:1 Multiplexer-Amplifier |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 696mW |
| Technology | BIPOLAR |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4315 |
| Pin Count | 16 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Channels | 1 |
| Analog IC - Other Type | VIDEO MULTIPLEXER |
| Operating Supply Current | 7.4mA |
| Output Current | 120mA |
| Slew Rate | 310V/μs |
| Voltage - Supply, Single/Dual (±) | 4V~10.5V ±2V~5.25V |
| Output Current per Channel | 95mA |
| Supply Type | Dual, Single |
| Gain Bandwidth Product | 97MHz |
| Supply Current-Max (Isup) | 9.4mA |
| Off-state Isolation-Nom | 82 dB |
| Switch-on Time-Max | 50ns |
| Height | 1.5mm |
| Length | 10mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX4315ESE Overview
There is a Tube package attached to class d amplifier.This is accessible in the 16-SOIC (0.154, 3.90mm Width) package to save space.It is a very good choice for 8:1 Multiplexer-Amplifier due to its high performance.Mounting audio power amplifier on the PCB is done using the Surface Mount method.In order to find audio amp, use its base part number MAX4315.16 pins are present on audio digital amplifier.16 terminations make up digital amplifiers structure.The audio power amplifier is included in Multiplexer or Switches.A supply current of 7.4mA is required to operate audio amplifier.The board is constructed using 16 pins.In order to ensure proper operation, the operating temperature should be below 85°C.It is recommended that the operating temperature is at least -40°C.At the present time, there are 1 channels available.Due to the 5V supply voltage, high efficiency is possible.In this case, Surface Mount is used as the mounting method.In order for the audio amplifier to work normally, the supply voltage (Vsup) should remain above 4V.As a result, the output current is set to 120mA.When audio amplifier ic is in use, it is supplied waudio amplifier ich voltage 5V.Dual, Single is the supply type.This audio amp uses an analog IC, which in this case is VIDEO MULTIPLEXER.
MAX4315ESE Features
Multiplexer or Switches subcategory
16 pins
1 channels
MAX4315ESE Applications
There are a lot of Maxim Integrated MAX4315ESE Video Amps and Modules applications.
- High-Fidelity (HiFi) Headphone Drivers
- Automotive external amplifier
- General-Purpose Amplifier Applications
- Preamplification and Filtering
- Set-Top Box
- Professional Audio Equipment
- Audio Test and Measurement
- HiFi Audio System Equipment
- Microphone Preamplifier Circuit
- Automotive active noise cancellation
