MAX4337EKA+T

2 Channels 110mA per Channel 60 dB Instrumentational OP Amps 0.6μA 8 Pins SOT-23-8

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX4337EKA+T
Package: SOT-23-8
Datasheet: PDF
Stock: 245
Description: 2 Channels 110mA per Channel 60 dB Instrumentational OP Amps 0.6μA 8 Pins SOT-23-8(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Package / Case	SOT-23-8
Number of Pins	8
Packaging	Strip
Published	2002
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Tin (Sn)
Max Operating Temperature	85°C
Min Operating Temperature	-40°C
Subcategory	Operational Amplifier
Technology	BICMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	2.7V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	30
Pin Count	8
Temperature Grade	INDUSTRIAL
Number of Channels	2
Max Supply Voltage	5.5V
Min Supply Voltage	2.7V
Operating Supply Current	1.3mA
Nominal Supply Current	1.2mA
Output Current	50mA
Slew Rate	1.8 V/μs
Amplifier Type	OPERATIONAL AMPLIFIER
Common Mode Rejection Ratio	60 dB
Output Current per Channel	110mA
Input Offset Voltage (Vos)	600μV
Gain Bandwidth Product	5MHz
Unity Gain BW-Nom	5000 kHz
Voltage Gain	95dB
Average Bias Current-Max (IIB)	0.6μA
Input Bias Current	100nA
Height Seated (Max)	1.45mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant

MAX4337EKA+T Overview

Op amp is packaged in SOT-23-8 case. The instrumentation amplifier in this picture is of the OPERATIONAL AMPLIFIER-type. Linear amplifier is delivered in a Strip case. The number of terminations approaches 8. Buffer amplifier has a total of 8 pins. Please take in mind that this instrumentation amplifier should be run at 2.7V. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. The buffer op amp includes 8 pins. With regards to the offset voltage of the input, buffer amplifier is rated at 600μV. This op amp can operate from a supply current at 1.3mA. Op amp is a member of the 95dB's 95dB family. As far as the device is concerned, buffer amplifier has 2 channels. For this linear amplifier to work, the temperature should not be below -40°C. You should only use instrumentation amplifier at temperatures that are no higher than 85°C. With regard to the supply voltage, this electrical component is capable of working from under 5.5V. A voltage of 2.7V or higher is recommended for the linear amplifier's supply voltage.