MAX4337EUA+

110mA per Channel 100nA 60 dB Instrumentational OP Amps 0.6μA 5.5V 2.7V~5.5V MAX4337 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX4337EUA+
Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Datasheet: PDF
Stock: 260
Description: 110mA per Channel 100nA 60 dB Instrumentational OP Amps 0.6μA 5.5V 2.7V~5.5V MAX4337 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Number of Pins	8
Operating Temperature	-40°C~85°C
Packaging	Tube
Published	2002
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Matte Tin (Sn)
Technology	BICMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	2.7V
Terminal Pitch	0.65mm
Base Part Number	MAX4337
Pin Count	8
Output Type	Rail-to-Rail
Operating Supply Voltage	5.5V
Number of Circuits	2
Operating Supply Current	1.3mA
Nominal Supply Current	1.2mA
Output Current	50mA
Slew Rate	1.8V/μs
Amplifier Type	General Purpose
Common Mode Rejection Ratio	60 dB
Current - Input Bias	100nA
Voltage - Supply, Single/Dual (±)	2.7V~5.5V
Output Current per Channel	110mA
Input Offset Voltage (Vos)	600μV
Gain Bandwidth Product	5MHz
Unity Gain BW-Nom	5000 kHz
Voltage Gain	95dB
Average Bias Current-Max (IIB)	0.6μA
Supply Voltage Limit-Max	6V
Height Seated (Max)	1.1mm
Length	3mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant

MAX4337EUA+ Overview

Packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case, the buffer op amp is ready to use. This is a General Purpose type op amp. The op amp is delivered to you in a Tube case. During the past two weeks, there have been close to 8 terminations. Buffer amplifier has a total of 8 pins on it. This linear amplifier should be powered by an 2.7V battery. 8 pins are available on the instrumentation amplifier. Regarding input offset voltage, op amp rates 600μV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . As long as the supply current of the chip does not exceed 1.3mA, this op amp ic can operate. There should be no change in the voltage gain. There are 2 circuits on op amps. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. The operating supply voltage of instrumentation amplifier is rated 5.5V voltage.