MAX4338EUB+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4338 |
| Pin Count | 10 |
| JESD-30 Code | S-PDSO-G10 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Circuits | 2 |
| Current - Supply | 1.3mA |
| Slew Rate | 1.8V/μs |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 100nA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Gain Bandwidth Product | 5MHz |
| Unity Gain BW-Nom | 5000 kHz |
| Average Bias Current-Max (IIB) | 0.6μA |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 600μV |
| Current - Output / Channel | 110mA |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
MAX4338EUB+T Overview
The linear amplifier is packaged in a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) case. There are two types of operational amplifiers in this circuit. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. There is a growing number of terminations approaching the number of 10. A total of 10 pins are located on this board. This linear amplifier should be powered by an 2.7V battery. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. Surface Mount is the recommended mounting type for this linear amplifier. With regard to operating temperature, op amp ranges -40°C~85°C. There are 2 circuits on op amps. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. It is recommended that this electronic component be used with an 1.3mA supply.
MAX4338EUB+T Features
10 Pins
supply voltage of 2.7V
Output Type: Rail-to-Rail
MAX4338EUB+T Applications
There are a lot of Maxim Integrated MAX4338EUB+T Instrumentational OP Amps applications.
- Television
- Signal amplification
- Integrator circuits
- Switching amplifier
- pH (acidity)
- Professional videography
- Video computer boards
- E-book readers
- Instrumentation
- Fission chambers
