MAX4372TEUK+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Weight | 29.993795mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 571mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4372 |
| Pin Count | 5 |
| Output Type | Voltage |
| Supply Voltage-Max (Vsup) | 28V |
| Power Supplies | 2.7/28V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 1 |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 30μA |
| Nominal Supply Current | 30μA |
| Max Supply Current | 60μA |
| Adjustable Threshold | NO |
| Accuracy | 0.18 % |
| Amplifier Type | Current Sense |
| Common Mode Rejection Ratio | 85 dB |
| Current - Input Bias | 2μA |
| Voltage - Supply, Single/Dual (±) | 2.7V~28V |
| Input Offset Voltage (Vos) | 300μV |
| Bandwidth | 275 kHz |
| Voltage Gain | 26.02dB |
| Power Supply Rejection Ratio (PSRR) | 75dB |
| Height | 1.3mm |
| Length | 3mm |
| Width | 1.75mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX4372TEUK+T Overview
The linear amplifier is packaged in a SC-74A, SOT-753 case which makes it easy for the consumer to handle. Op amps are Current Sense types of amplifier on the chip. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. A total of 5 terminations have been reported in the past few weeks. The total number of pins on linear amplifier is 5. I would like to remind you that this buffer op amp should be powered by an 12V battery. Instrumentation amplifier is a part of Power Management Circuits. A total of 5 pins are present on the instrumentation amplifier. With regards to the offset voltage of the input, buffer amplifier is rated at 300μV. For this electronic part, it is recommended that you mount it with type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . It is possible to operate this buffer amplifier from a supply current of 30μA . It is a member of the 26.02dB's 26.02dB family. As far as the device is concerned, buffer amplifier has 1 channels. On the output type, there are Voltage different types of op amps. An analog IC that is also used in this instrumentation amplifier is referred to as the POWER SUPPLY SUPPORT CIRCUIT type.
MAX4372TEUK+T Features
5 Pins
supply voltage of 12V
26.02dB voltage gain
Output Type: Voltage
MAX4372TEUK+T Applications
There are a lot of Maxim Integrated MAX4372TEUK+T Instrumentational OP Amps applications.
- Computer workstations
- Radiation thermometry transducers
- Strain gauges
- Subtraction operation circuits
- Exponential operation circuits
- Integrator circuits
- Fast A/D and D/A converters
- Radar
- Video computer boards
- Oscilloscopes
