MAX4380EUT+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 571mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4380 |
| Pin Count | 6 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 9V |
| Number of Circuits | 1 |
| Operating Supply Current | 7.5mA |
| Slew Rate | 485V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 8.5μA |
| Voltage - Supply, Single/Dual (±) | 4.5V~11V ±2.25V~5.5V |
| Output Current per Channel | 75mA |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 210MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 63dB |
| Average Bias Current-Max (IIB) | 25μA |
| Power Supply Rejection Ratio (PSRR) | 50dB |
| Supply Voltage Limit-Max | 6V |
| Length | 2.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX4380EUT+T Overview
Packaging for the buffer amplifier is in the form of a SOT-23-6 case. A Voltage Feedback-type buffer amplifier is shown here. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. We are approaching the 6h termination of the year. A total of 6 pins are attached to buffer op amp. Please take in mind that op amp should be run at 5V. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. The buffer op amp includes 6 pins. In terms of the input offset voltage, instrumentation amplifier rates at 3mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . The buffer amplifier is capable of operating from a supply current of 7.5mA . There should be no change in the voltage gain at 63dB. This op amp contains 1 circuits. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. The operating supply voltage of the buffer op amp is rated at 9V.
MAX4380EUT+T Features
6 Pins
supply voltage of 5V
63dB voltage gain
Output Type: Rail-to-Rail
MAX4380EUT+T Applications
There are a lot of Maxim Integrated MAX4380EUT+T Instrumentational OP Amps applications.
- Radar
- Mobile phone
- Strain gauges
- Tablets
- Video computer boards
- Multimedia playback equipment
- Signal operation
- Video data acquisition
- High input resistance broadband
- Navigation
