MAX4380EXT+T
| Parameters | |
|---|---|
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 9V |
| Number of Circuits | 1 |
| Operating Supply Current | 7.5mA |
| Slew Rate | 485V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 8.5μA |
| Voltage - Supply, Single/Dual (±) | 4.5V~11V ±2.25V~5.5V |
| Output Current per Channel | 75mA |
| Input Offset Voltage (Vos) | 3mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 63dB |
| Average Bias Current-Max (IIB) | 25μA |
| Power Supply Rejection Ratio (PSRR) | 50dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 210MHz |
| Programmable Power | NO |
| Wideband | YES |
| Length | 2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 245mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4380 |
| Pin Count | 6 |
| JESD-30 Code | R-PDSO-G6 |
MAX4380EXT+T Overview
Packaging for the buffer amplifier is in the form of a 6-TSSOP, SC-88, SOT-363 case. This is a Voltage Feedback type op amp. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. In recent months, the number of terminations has approached 6. Buffer amplifier has a total of 6 pins. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. As far as the input offset voltage is concerned, linear amplifier rates at 3mV. For this electrical component, Surface Mount is the recommended mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . This op amp can operate from a supply current at 7.5mA. 63dB should remain the voltage gain. This op amp ic has 1 circuits. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. The operating supply voltage of the buffer op amp is rated at 9V.
MAX4380EXT+T Features
6 Pins
supply voltage of 5V
63dB voltage gain
Output Type: Rail-to-Rail
MAX4380EXT+T Applications
There are a lot of Maxim Integrated MAX4380EXT+T Instrumentational OP Amps applications.
- Power generator
- Fission chambers
- Oscilloscopes
- Automotive sensors
- Radar
- Non-polarized electrodes
- Large motor controllers
- RF cable systems
- Signal transformation
- MP3
