MAX4382ESD+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4382 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Power Supplies | +-2.25/+-5.5/4.5/11V |
| Number of Circuits | 3 |
| Current - Supply | 7.5mA |
| Slew Rate | 485V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 95 dB |
| Current - Input Bias | 8.5μA |
| Voltage - Supply, Single/Dual (±) | 4.5V~11V ±2.25V~5.5V |
| Bandwidth | 210MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Average Bias Current-Max (IIB) | 25μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 3mV |
| Low-Bias | NO |
| Micropower | NO |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -6V |
| Power | NO |
| Voltage Gain-Min | 250 |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| RoHS Status | ROHS3 Compliant |
MAX4382ESD+ Overview
In order to protect the op amps, a 14-SOIC (0.154, 3.90mm Width) case is used. This is a Voltage Feedback type op amp. There is a Tube case that is delivered with the instrumentation amplifiers. The number of terminations approaches 14. In this case, there are 14 pins on the board. It is important to remember that this op amp should be operated at a voltage of 5V volts. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. 14 pins are located on the operational amplifiers. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . On this instrumentation amplifier, there are 3 circuits that are connected together. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. In order to ensure optimal performance, an 7.5mA supply is recommended for this electrical component. A minimum voltage gain of 250 is the minimum voltage gain that this instrumentation amplifier is capable of producing.
MAX4382ESD+ Features
14 Pins
supply voltage of 5V
Output Type: Rail-to-Rail
MAX4382ESD+ Applications
There are a lot of Maxim Integrated MAX4382ESD+ Instrumentational OP Amps applications.
- Blood pressure sensors
- Industrial control system
- Integrator circuits
- Television broadcasting equipment
- Strain gauges
- Tablets
- Multiplication circuits
- Portable docking station
- Biopotential
- Laptop
