MAX4420CSA
| Parameters | |
|---|---|
| Number of Drivers | 1 |
| Output Peak Current Limit-Nom | 6A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 6A 6A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 471mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 18V |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4420 |
| Pin Count | 8 |
| Max Output Current | 6A |
| Nominal Supply Current | 450μA |
| Output Current | 6A |
| Max Supply Current | 1.5mA |
| Input Type | Non-Inverting |
| Rise Time | 25ns |
| Fall Time (Typ) | 25 ns |
| Rise / Fall Time (Typ) | 25ns 25ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
MAX4420CSA Overview
A higher degree of flexibility is achieved by adopting its 8-SOIC (0.154, 3.90mm Width) package.The packaging method is indicated by Tube.The configuration is supported by 1 drivers.Ideally, it should be mounted in the direction of Surface Mount.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 4.5V~18V supply voltage.Gate type N-Channel, P-Channel MOSFET has been used in its design.This device can operate at temperatures up to 0°C~70°C TA.A type of Non-Inverting is used for input in this program.8 terminations constitute its foundation.Under its base part number MAX4420, various related parts can be found.Mounting the device requires Surface Mount.During design, it is configured with 8 pins.This device operates with 18V supply voltage.There is an interface IC called BUFFER OR INVERTER BASED MOSFET DRIVER that is employed in this device.Mosfet driver is possible to achieve a maximum output current of 6A.There are various useful electronic components in its subcategory MOSFET Drivers.On the board, there are 8 component pins.Mosfet gate drivers can deliver a current of 6A.Based on its maximum power dissipation of 471mW, it is clear that it is capable of transferring and conducting power loss without overheating.If you want a stable supply current, you should keep it at 1.5mA.
MAX4420CSA Features
Embedded in the Tube package
1 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 471mW
MAX4420CSA Applications
There are a lot of Maxim Integrated MAX4420CSA gate drivers applications.
- AC-DC Inverters
- Portable computers
- PCMCIA applications
- Commercial air-conditioning (CAC)
- LCD/LCoS/DLP portable and embedded pico projectors
- High power buffers
- Telecom switch mode power supplies
- Motor Controls
- Solar power supplies
- Industrial Power Supplies
