MAX4420CSA+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1996 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 471mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 18V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4420 |
| Pin Count | 8 |
| Max Output Current | 6A |
| Nominal Supply Current | 1.5mA |
| Max Supply Current | 1.5mA |
| Input Type | Non-Inverting |
| Rise Time | 30ns |
| Fall Time (Typ) | 30 ns |
| Rise / Fall Time (Typ) | 25ns 25ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Output Peak Current Limit-Nom | 6A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 6A 6A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX4420CSA+T Overview
The 8-SOIC (0.154, 3.90mm Width) package provides greater flexibility.Tape & Reel (TR) is the packaging method.For its configuration, it incorporates 1 drivers.Gate drivers is mounted in the way of Surface Mount.In the absence of a 4.5V~18V supply voltage, it can demonstrate its superiority.Gate drivers is designed wGate driversh a N-Channel, P-Channel MOSFET gate.This device allows temperatures in the range of 0°C~70°C TA.Non-Inverting is used as the input type in this program.It's configured with 8 terminations.There are various parts that can be found under its base part number MAX4420.In this case, Surface Mount indicates how the device is mounted.There are 8 pins available in the device.In order to operate, a voltage of 18V has to be applied.The interface chip of the system is BUFFER OR INVERTER BASED MOSFET DRIVER.In the maximum case, the output current can be limited to 6A.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.The board has a total of 8 component pins.Considering its maximum power dissipation, 471mW shows its maximum capacity to transfer and conduct power loss without overheating.Keeping the supply current at 1.5mA ensures greater stability.
MAX4420CSA+T Features
Embedded in the Tape & Reel (TR) package
1 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 471mW
MAX4420CSA+T Applications
There are a lot of Maxim Integrated MAX4420CSA+T gate drivers applications.
- Uninterruptible Power Supplies (UPS)
- UPS systems
- serial peripheral interface (SPI), I2C
- High frequency line drivers
- Refrigerator
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- AC-DC Inverters
- General Purpose 3-Phase Inverter
- Line drivers
- Solar power supplies
