MAX4420EPA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 727mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 18V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4420 |
| Pin Count | 8 |
| Max Output Current | 6A |
| Nominal Supply Current | 150μA |
| Output Current | 6A |
| Max Supply Current | 1.5mA |
| Input Type | Non-Inverting |
| Rise Time | 25ns |
| Fall Time (Typ) | 25 ns |
| Rise / Fall Time (Typ) | 25ns 25ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Output Peak Current Limit-Nom | 6A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 6A 6A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Height | 4.45mm |
| Length | 9.91mm |
| Width | 7.87mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
MAX4420EPA+ Overview
For greater flexibility, its 8-DIP (0.300, 7.62mm) package is used.Gate drivers is packaged in the way of Tube.There are 1 drivers installed for this device.Ideally, it should be mounted in the direction of Through Hole.When the supply voltage is set to 4.5V~18V, it can demonstrate its superiority.Gate type N-Channel, P-Channel MOSFET has been used in its design.This device is allowed to operate in a temperature range of -40°C~85°C TA.Input type of Non-Inverting is used.Mosfet driver consists of 8 terminations as Mosfet drivers foundation.Many related parts can be found under its base part number MAX4420.Devices are mounted by Through Hole.As a result, it is configured with 8 pins when it is designed.A supply voltage of 18V is required for operation.There is an interface IC called BUFFER OR INVERTER BASED MOSFET DRIVER that is employed in this device.There is a maximum output current of 6A.Mosfet driver includes a number of useful electronic components in Mosfet drivers subcategory of MOSFET Drivers.A board with 8 component pins is available.Mosfet gate drivers can deliver a current of 6A.This device has a maximum power dissipation of 727mW, indicating that it is capable of reducing power loss without overheating.In order to ensure greater stability, it is recommended to keep the supply current at 1.5mA.
MAX4420EPA+ Features
Embedded in the Tube package
1 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 727mW
MAX4420EPA+ Applications
There are a lot of Maxim Integrated MAX4420EPA+ gate drivers applications.
- Solar inverters
- Portable computers
- Industrial motor drives - compact, standard, premium, servo drives
- UPS systems
- DC-DC Converters
- High frequency line drivers
- Line drivers
- High-voltage isolated DC-DC converters
- A/D drivers
- DC/DC converters
