MAX4420ESA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 471mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 18V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4420 |
| Pin Count | 8 |
| Output Voltage | 18V |
| Max Output Current | 6A |
| Nominal Supply Current | 450μA |
| Output Current | 6A |
| Max Supply Current | 1.5mA |
| Input Type | Non-Inverting |
| Rise Time | 25ns |
| Fall Time (Typ) | 25 ns |
| Rise / Fall Time (Typ) | 25ns 25ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Output Peak Current Limit-Nom | 6A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 6A 6A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX4420ESA+ Overview
Gate drivers provides greater flexibilGate driversy to use the 8-SOIC (0.154, 3.90mm Width) package.Tube is the form of the package.1 drivers are incorporated for its configuration.Ideally, it should be mounted in the direction of Surface Mount.In the absence of a 4.5V~18V supply voltage, its superiority can be demonstrated.Gate drivers is designed wGate driversh a gate type of N-Channel, P-Channel MOSFET.This device allows temperatures in the range of -40°C~85°C TA.Non-Inverting is used as the input type.The configuration is based on 8 terminations.There are various related parts under its base part number MAX4420.The device is mounted using Surface Mount.A total of 8 pins are available on the device.Mosfet driver is designed specifically to run on 18V volts of power.As its interface IC, BUFFER OR INVERTER BASED MOSFET DRIVER is being employed.The maximum output current can amount to 6A.In this subcategory of MOSFET Drivers, there are numerous useful electronic components.The board has a total of 8 component pins.The output current can be set to 6A.Its maximum power dissipation of 471mW shows its power loss capacity without overheating.Keeping the supply current at 1.5mA ensures greater stability.When this voltage is produced, it is marked as 18V.
MAX4420ESA+ Features
Embedded in the Tube package
1 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 471mW
MAX4420ESA+ Applications
There are a lot of Maxim Integrated MAX4420ESA+ gate drivers applications.
- Commercial air-conditioning (CAC)
- High-speed communications
- Automotive Applications
- Digitally controlled power supplies
- Dual-Battery Systems
- Telecom switch mode power supplies
- Portable computers
- Uninterruptible Power Supplies (UPS)
- RGB applications
- Isolated switch mode power supplies (SMPS)
