MAX44245ASD+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2013 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 4 |
| Supply Voltage | 10V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX44245 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Number of Circuits | 4 |
| Operating Supply Current | 90μA |
| Slew Rate | 0.7V/μs |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 120 dB |
| Current - Input Bias | 150pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~36V ±1.35V~18V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 2μV |
| Bandwidth | 1MHz |
| Unity Gain BW-Nom | 1000 kHz |
| Average Bias Current-Max (IIB) | 0.0007μA |
| Power Supply Rejection Ratio (PSRR) | 133dB |
| Input Voltage Noise Density | 500nV/sqrt Hz |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
MAX44245ASD+ Overview
Packaged in a 14-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. Op amps are General Purpose types of amplifier on the chip. Upon delivery, op amp ic is packaged in a Tube case. It is estimated that there will be 14 terminations in the next few months. There are a total of 14 pins on this op amp. As a reminder, this buffer op amp should be powered by 10V battery and that the battery should be inserted in the amplifier. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. The buffer op amp includes 14 pins. In terms of the input offset voltage, instrumentation amplifier rates at 2μV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. With regard to operating temperature, this op amp functions well at -40°C~125°C. It is possible to operate this buffer amplifier from a supply current of 90μA . In total, there are 4 circuits on this buffer amplifier. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages.
MAX44245ASD+ Features
14 Pins
supply voltage of 10V
Output Type: Rail-to-Rail
MAX44245ASD+ Applications
There are a lot of Maxim Integrated MAX44245ASD+ Instrumentational OP Amps applications.
- Proportional counter tubes
- Biopotential
- Digital cameras
- Polarized electrodes
- Image computer boards
- Communication device
- Multiplication circuits
- RF cable systems
- PDA
- Switching amplifier
