MAX44246ASA+

2 Channels 40mA per Channel 300pA 146 dB Instrumentational OP Amps 0.0011μA 2.7V~36V ±1.35V~18V MAX44246 8 Pins 8-SOIC (0.154, 3.90mm Width)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX44246ASA+
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 636
Description: 2 Channels 40mA per Channel 300pA 146 dB Instrumentational OP Amps 0.0011μA 2.7V~36V ±1.35V~18V MAX44246 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Matte Tin (Sn)
Subcategory	Operational Amplifier
Packing Method	TAPE AND REEL
Technology	BICMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Number of Functions	2
Supply Voltage	10V
Base Part Number	MAX44246
Pin Count	8
Output Type	Rail-to-Rail
Number of Channels	2
Operating Supply Current	830μA
Nominal Supply Current	420μA
Output Current	30mA
Slew Rate	3.8V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	146 dB
Current - Input Bias	300pA
Voltage - Supply, Single/Dual (±)	2.7V~36V ±1.35V~18V
Output Current per Channel	40mA
Input Offset Voltage (Vos)	1μV
Bandwidth	5MHz
Unity Gain BW-Nom	5000 kHz
Voltage Gain	168dB
Average Bias Current-Max (IIB)	0.0011μA
Low-Offset	YES
Frequency Compensation	YES
Supply Voltage Limit-Max	40V
Low-Bias	YES
Micropower	YES
Programmable Power	NO
Power	NO
Height Seated (Max)	1.75mm
Length	4.9mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	ROHS3 Compliant
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Number of Pins	8
Operating Temperature	-40°C~125°C
Packaging	Tube
Published	2013
JESD-609 Code	e3

MAX44246ASA+ Overview

Op amp is packaged in 8-SOIC (0.154, 3.90mm Width) case. Buffer amps of this type are called General Purpose-types. A Tube case is used to deliver the buffer op amp. During the past two weeks, there have been close to 8 terminations. Linear amplifier has a total of 8 pins. Please take in mind that this instrumentation amplifier should be run at 10V. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. 8 pins are included on the operational amplifiers. In terms of input offset voltage, operational amplifier rates 1μV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. As long as the supply current of the chip does not exceed 830μA, this op amp ic can operate. Op amp is a member of the 168dB's 168dB family. Buffer op amp is equipped with 2 channels on the device. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. The linear amplifier is packaged by using a TAPE AND REEL axis.