MAX44246ASA+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-SOIC |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 470.6mW |
| Base Part Number | MAX44246 |
| Output Type | Rail-to-Rail |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 830μA |
| Nominal Supply Current | 420μA |
| Output Current | 30mA |
| Current - Supply | 830μA |
| Slew Rate | 3.8V/μs |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 146 dB |
| Current - Input Bias | 300pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~36V ±1.35V~18V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 1μV |
| Bandwidth | 5MHz |
| Gain Bandwidth Product | 5MHz |
| Voltage Gain | 168dB |
| Voltage - Input Offset | 1μV |
| Current - Output / Channel | 40mA |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX44246ASA+T Overview
In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. There are two types of operational amplifiers in this circuit. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. Linear amplifier includes 8 pins. The input offset voltage is 1μV. For this electronic part, it is recommended that you mount it with type Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~125°C when it comes to operating temperatureYou can run this op amp ic on 830μA . 168dB should remain the voltage gain. This op amp ic has 2 circuits. Buffer op amp is equipped with 2 channels on the device. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. In order for this buffer op amp to function, it should have a temperature of at least -40°C degrees Celsius. You should not use op amp above 125°C degrees. For optimal performance, this electrical part should be connected to a supply with a current of 830μA. With regard tp supply voltage, op amp is used under 36V. Keeping the linear amplifier's supply voltage above 2.7V is recommended.
MAX44246ASA+T Features
168dB voltage gain
Output Type: Rail-to-Rail
MAX44246ASA+T Applications
There are a lot of Maxim Integrated MAX44246ASA+T Instrumentational OP Amps applications.
- Information processing
- High-frequency data acquisition systems
- Power control
- Television broadcasting equipment
- Semiconductor detectors
- Signal operation
- High gain DC amplifier
- Car stereo
- Addition operation circuits
- PDA
