MAX44246AUA+T

2 Channels 40mA per Channel 300pA 146 dB Instrumentational OP Amps 2.7V~36V ±1.35V~18V MAX44246 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX44246AUA+T
Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Datasheet: PDF
Stock: 717
Description: 2 Channels 40mA per Channel 300pA 146 dB Instrumentational OP Amps 2.7V~36V ±1.35V~18V MAX44246 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Number of Pins	8
Supplier Device Package	8-uMAX
Operating Temperature	-40°C~125°C
Packaging	Tape & Reel (TR)
Published	2013
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Max Operating Temperature	125°C
Min Operating Temperature	-40°C
Base Part Number	MAX44246
Output Type	Rail-to-Rail
Number of Channels	2
Number of Circuits	2
Max Supply Voltage	36V
Min Supply Voltage	2.7V
Operating Supply Current	830μA
Nominal Supply Current	420μA
Output Current	30mA
Current - Supply	830μA
Slew Rate	3.8V/μs
Amplifier Type	General Purpose
Common Mode Rejection Ratio	146 dB
Current - Input Bias	300pA
Voltage - Supply, Single/Dual (±)	2.7V~36V ±1.35V~18V
Output Current per Channel	40mA
Input Offset Voltage (Vos)	1μV
Bandwidth	5MHz
Gain Bandwidth Product	5MHz
Voltage Gain	168dB
Voltage - Input Offset	1μV
Current - Output / Channel	40mA
Radiation Hardening	No
RoHS Status	ROHS3 Compliant

MAX44246AUA+T Overview

Packaging for the buffer amplifier is in the form of a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. This is a General Purpose type op amp. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. In total, the buffer amplifier consists of 8 pins. Regarding input offset voltage, op amp rates 1μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. With regard to operating temperature, op amp ranges -40°C~125°C. Using a supply current of 830μA , this buffer op amp will be able to operate. 168dB should be the voltage gain. The buffer amp consists of 2 circuits in total. On the buffer amps, there are 2 channels that can be used. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. This op amp needs to be operated at a temperature of not less than -40°C degrees Celsius in order to function properly. You should only use instrumentation amplifier at temperatures that are no higher than 125°C. As a recommendation, this electronic component should be used with a power supply that can deliver 830μA. When it comes to the voltage from which this electrical part will operate, it can operate at a maximum of less than 36V. The linear amplifier's supply voltage should be higher than 2.7V.