MAX44248AUA+

2 Channels 40mA per Channel 150pA 126 dB Instrumentational OP Amps 0.0007μA 18V 2.7V~36V ±1.35V~18V MAX44248 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX44248AUA+
Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Datasheet: PDF
Stock: 669
Description: 2 Channels 40mA per Channel 150pA 126 dB Instrumentational OP Amps 0.0007μA 18V 2.7V~36V ±1.35V~18V MAX44248 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Contact Plating	Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Number of Pins	8
Operating Temperature	-40°C~125°C
Packaging	Tube
Published	2012
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Subcategory	Operational Amplifier
Technology	BICMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Number of Functions	2
Supply Voltage	10V
Terminal Pitch	0.65mm
Base Part Number	MAX44248
Pin Count	8
Output Type	Rail-to-Rail
Operating Supply Voltage	18V
Number of Channels	2
Operating Supply Current	90μA
Nominal Supply Current	90μA
Output Current	40mA
Slew Rate	0.7V/μs
Amplifier Type	General Purpose
Common Mode Rejection Ratio	126 dB
Current - Input Bias	150pA
Voltage - Supply, Single/Dual (±)	2.7V~36V ±1.35V~18V
Output Current per Channel	40mA
Input Offset Voltage (Vos)	2μV
Bandwidth	1MHz
Unity Gain BW-Nom	1000 kHz
Voltage Gain	150dB
Average Bias Current-Max (IIB)	0.0007μA
Supply Voltage Limit-Max	40V
Max Frequency	1kHz
Height	950μm
Length	3.1mm
Width	3.1mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	ROHS3 Compliant

MAX44248AUA+ Overview

It is packaged in an 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)-case that protects the operational amplifiers from damage. The instrumentation amplifier in this picture is of the General Purpose-type. In the case of Tube cases, linear amplifier will be delivered. During the past two weeks, there have been close to 8 terminations. In total, there are 8 pins on this op amp ic. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 10V. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. There are 8 pins on this chip. With regards to the offset voltage of the input, buffer amplifier is rated at 2μV. This electrical part should be mounted using type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . This op amp can operate from a supply current at 90μA. Voltage gain should remain at 150dB. Buffer op amp is equipped with 2 channels on the device. On the output type, there are Rail-to-Rail different types of op amps. The operating supply voltage of instrumentation amplifier is rated 18V voltage.