MAX44251AKA+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-8 |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Max Power Dissipation | 727mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX44251 |
| Output Type | Rail-to-Rail |
| Number of Circuits | 2 |
| Operating Supply Current | 1.15mA |
| Nominal Supply Current | 1.15mA |
| Output Current | 58mA |
| Slew Rate | 8V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Zero-Drift |
| Common Mode Rejection Ratio | 133 dB |
| Current - Input Bias | 200pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~20V ±1.35V~10V |
| Output Current per Channel | 96mA |
| Input Offset Voltage (Vos) | 3μV |
| Bandwidth | 10MHz |
| Unity Gain BW-Nom | 10000 kHz |
| Voltage Gain | 154dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.0013μA |
| Programmable Power | NO |
| Height Seated (Max) | 1.45mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX44251AKA+T Overview
It is packaged in an SOT-23-8-case that protects the operational amplifiers from damage. A Zero-Drift-type buffer amplifier is shown here. A Tape & Reel (TR) case is used for delivering the op amp. A total of 8 terminations have been reported in the past few weeks. The linear amplifier should be run at 3.3V at all times, so please keep that in mind when using it. This particular linear amplifier is a type of Operational Amplifier device, to be precise. A total of 8 pins are present on the instrumentation amplifier. Op amp rates 3μV as input offset voltage. For this electrical component, Surface Mount is the recommended mounting type. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~125°C . Using a supply current of 1.15mA , this buffer op amp will be able to operate. There should be no change in the voltage gain. There are 2 circuits on op amps. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. For packing the buffer amplifier, the TAPE AND REEL-axis is adopted.
MAX44251AKA+T Features
supply voltage of 3.3V
154dB voltage gain
Output Type: Rail-to-Rail
MAX44251AKA+T Applications
There are a lot of Maxim Integrated MAX44251AKA+T Instrumentational OP Amps applications.
- PDA
- Voltage regulation circuit
- Image computer boards
- Television
- Automotive sensors
- Signal amplification
- Portable media players
- Navigation
- Non-polarized electrodes
- Displayers for aircraft and air transportation control systems
