MAX44263AXA+T
| Parameters | |
|---|---|
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Power Supplies | 3.3V |
| Number of Channels | 2 |
| Operating Supply Current | 650μA |
| Nominal Supply Current | 1μA |
| Slew Rate | 7V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 75 dB |
| Current - Input Bias | 0.01pA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 10μV |
| Bandwidth | 15MHz |
| Unity Gain BW-Nom | 15000 kHz |
| Voltage Gain | 115dB |
| Average Bias Current-Max (IIB) | 0.00016μA |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 5e-7μA |
| Programmable Power | NO |
| Power | NO |
| Height Seated (Max) | 1.1mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFSOP (0.049, 1.25mm Width) |
| Number of Pins | 8 |
| Manufacturer Package Identifier | X8CN+1 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2015 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX44263 |
MAX44263AXA+T Overview
There is a 8-VFSOP (0.049, 1.25mm Width) case package that contains the instrumentation amplifiers. There are two types of operational amplifiers in this circuit. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. The number of terminations is approaching the 8 mark. It is important to remember that this op amp should be operated at a voltage of 3.3V volts. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. The buffer op amp includes 8 pins. With regards to the offset voltage of the input, buffer amplifier is rated at 10μV. For this electrical component, Surface Mount is the recommended mounting type. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. You can run this op amp ic on 650μA . The voltage gain should stay at 115dB. Op amp ic has 2 channels. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. As a result of this, the buffer amplifier is packed in TAPE AND REEL.
MAX44263AXA+T Features
supply voltage of 3.3V
115dB voltage gain
Output Type: Rail-to-Rail
MAX44263AXA+T Applications
There are a lot of Maxim Integrated MAX44263AXA+T Instrumentational OP Amps applications.
- Broadcasting
- Signal operation
- Commercial audio systems
- Instrumentation
- Communication device
- Medical imaging
- MP3
- Digital cameras
- Signal filtering
- Video computer boards
