MAX44264EWT+T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-WFBGA, WLBGA |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 840mW |
| Technology | BICMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| Base Part Number | MAX44264 |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 750nA |
| Nominal Supply Current | 750nA |
| Output Current | 11mA |
| Slew Rate | 0.002V/μs |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 200pA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Output Current per Channel | 36mA |
| Input Offset Voltage (Vos) | 500μV |
| Bandwidth | 9 kHz |
| Unity Gain BW-Nom | 90 kHz |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.00425μA |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Supply Voltage Limit-Max | 6V |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Contact Plating | Copper, Silver, Tin |
MAX44264EWT+T Overview
The linear amplifier is packaged in a 6-WFBGA, WLBGA case. An op amp ic of the General Purpose type. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. It is estimated that there will be at least 6 terminations this year. It is important to remember that this op amp should be operated at a voltage of 5V volts. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. A total of 6 pins are present on the instrumentation amplifier. Op amp rates 500μV as input offset voltage. This electronic part is recommended for mounting type Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperatureThis op amp can operate from a supply current at 750nA. There should be no change in the voltage gain at 120dB. As far as the device is concerned, buffer amplifier has 1 channels. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals.
MAX44264EWT+T Features
supply voltage of 5V
120dB voltage gain
Output Type: Rail-to-Rail
MAX44264EWT+T Applications
There are a lot of Maxim Integrated MAX44264EWT+T Instrumentational OP Amps applications.
- Home audio systems
- Signal amplification
- Automotive sensors
- Vehicle electronics
- Signal operation
- Proportional counter tubes
- Professional videography
- RF cable systems
- ECG equipment
- single/dual op amp sum and difference circuits
