MAX4426CSA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 506.605978mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 471mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4426 |
| Pin Count | 8 |
| Max Output Current | 1.5A |
| Operating Supply Current | 400μA |
| Element Configuration | Dual |
| Output Current | 1.5A |
| Max Supply Current | 4.5mA |
| Input Type | Inverting |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 20ns |
| Fall Time (Typ) | 20 ns |
| Output Polarity | INVERTED |
| Input Characteristics | STANDARD |
| Rise / Fall Time (Typ) | 20ns 20ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.04 μs |
| Output Peak Current Limit-Nom | 1.5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.06 μs |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
MAX4426CSA+ Overview
Its 8-SOIC (0.154, 3.90mm Width) package provides greater flexibility.Tube represents the packaging method.This device is equipped with 2 drivers for its configuration.Its recommended mounting way is Surface Mount.In the absence of a power supply voltage of 4.5V~18V V, it is able to demonstrate its superiority.This gate type has a N-Channel, P-Channel MOSFET design.There is a temperature range for this device of 0°C~70°C TA.Inverting is used as its input type.Its configuration starts with 8 terminations.There are various related parts under its base part number MAX4426.You mount it with Surface Mount.In the device, there are 8 pins.Mosfet driver is equipped wMosfet driverh an interface chip BUFFER OR INVERTER BASED MOSFET DRIVER.There is a maximum output current of 1.5A that can be achieved.Its subcategory of MOSFET Drivers contains various useful electronic components.A total of 8 pins are available for component connections.The output current of this device can be set to 1.5A.Having the maximum power dissipation of 471mW indicates its maximum capacity to conduct power losses without overheating.Mosfet gate drivers is recommended that you keep the supply current at 4.5mA in order to achieve greater stabilMosfet gate driversy.Mosfet gate drivers operates wMosfet gate driversh the supply voltage of 400μA.The input of this function is characterised by STANDARD.
MAX4426CSA+ Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 471mW
MAX4426CSA+ Applications
There are a lot of Maxim Integrated MAX4426CSA+ gate drivers applications.
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Motor Control
- A/D drivers
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Pulse transformer drivers
- High-speed communications
- Industrial Modules
- Multicolor LED/laser displays
- 3-Phase Motor Inverter Driver
- RGB applications
