MAX4426CSA+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX4426 |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Qualification Status | Not Qualified |
| Power Supplies | 5/18V |
| Supply Current-Max | 8mA |
| Input Type | Inverting |
| Output Characteristics | TOTEM-POLE |
| Output Polarity | INVERTED |
| Input Characteristics | STANDARD |
| Rise / Fall Time (Typ) | 20ns 20ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.04 μs |
| Output Peak Current Limit-Nom | 1.5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.06 μs |
| Height Seated (Max) | 1.753mm |
| Length | 4.8895mm |
| Width | 3.9116mm |
| RoHS Status | ROHS3 Compliant |
MAX4426CSA+T Overview
The 8-SOIC (0.154, 3.90mm Width) package provides greater flexibility.Tape & Reel (TR) represents the package.Gate drivers is configured wGate driversh 2 drivers.Ideally, it should be mounted in the direction of Surface Mount.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 4.5V~18V supply voltage.Gate drivers is designed wGate driversh a gate type of N-Channel, P-Channel MOSFET.0°C~70°C TA is the allowed temperature range for this device.This program uses the input type of Inverting.There are 8 terminations to form the base of its configuration.Mosfet driver contains a variety of related parts under Mosfet drivers base part number MAX4426.The interface chip of the system is BUFFER OR INVERTER BASED MOSFET DRIVER.Several electronic components are included in its subcategory of MOSFET Drivers.The board contains 8 pins for component connections.With its power supplies of 5/18V, it solves the problems of power supply for a variety of applications.The input is characterized by STANDARD.Operation cannot exceed 8mA supply current.
MAX4426CSA+T Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
MAX4426CSA+T Applications
There are a lot of Maxim Integrated MAX4426CSA+T gate drivers applications.
- Line drivers
- Pulse transformer drivers
- High-speed communications
- serial peripheral interface (SPI), I2C
- Isolated Gate Driver Supplies
- Isolated switch mode power supplies (SMPS)
- Industrial Modules
- Dual-Battery Systems
- DC-DC Converters
- Active Clamp Flyback or Forward and Synchronous Rectifier
