MAX4427CPA
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 727mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4427 |
| Pin Count | 8 |
| Max Output Current | 1.5A |
| Element Configuration | Dual |
| Nominal Supply Current | 400μA |
| Output Current | 1.5A |
| Max Supply Current | 4.5mA |
| Input Type | Non-Inverting |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 20ns |
| Fall Time (Typ) | 20 ns |
| Output Polarity | TRUE |
| Input Characteristics | STANDARD |
| Rise / Fall Time (Typ) | 20ns 20ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.04 μs |
| Output Peak Current Limit-Nom | 1.5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.06 μs |
| Height | 3.302mm |
| Length | 10.03mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
MAX4427CPA Overview
A higher degree of flexibility is achieved by adopting its 8-DIP (0.300, 7.62mm) package.Tube represents the package.For its configuration, it incorporates 2 drivers.It's mounted on the way to Through Hole.Using a 4.5V~18V supply voltage, gate drivers is capable of demonstrating Gate driverss superiorGate driversy.Gate drivers is designed wGate driversh a N-Channel, P-Channel MOSFET gate.This device is allowed to operate in a temperature range of 0°C~70°C TA.The input type for this program is Non-Inverting.Its configuration is based on a total of 8 terminations.The base part number MAX4427 refers to a number of related parts.Through Hole is the way it takes to mount the device.When the device is designed, it has 8 pins.Mosfet driver utilizes the interface IC BUFFER OR INVERTER BASED MOSFET DRIVER.1.5A is the maximum output current.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.There are 8 component pins on the board.Mosfet driver supports an output current of 1.5A.Having the maximum power dissipation of 727mW indicates its maximum capacity to conduct power losses without overheating.The supply current should be kept at 4.5mA to ensure higher stability.A STANDARD character describes its input.
MAX4427CPA Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 727mW
MAX4427CPA Applications
There are a lot of Maxim Integrated MAX4427CPA gate drivers applications.
- Commercial and agricultural vehicles (CAV)
- LCD/LCoS/DLP portable and embedded pico projectors
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Motor Drives
- Portable Media Players
- Refrigerator
- DC-DC Converters
- Active filtering
- 3-Phase Motor Inverter Driver
- Solar power supplies
