MAX4428MJA/883B
| Parameters | |
|---|---|
| Max Output Current | 1.5A |
| Nominal Supply Current | 4.5mA |
| Max Supply Current | 4.5mA |
| Input Type | Inverting, Non-Inverting |
| Rise Time | 30ns |
| Fall Time (Typ) | 30 ns |
| Rise / Fall Time (Typ) | 20ns 20ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.04 µs |
| Output Peak Current Limit-Nom | 1.5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.06 µs |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-CDIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2000 |
| Series | Military, MIL-STD-883 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | TIN LEAD |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 640mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 8 |
MAX4428MJA/883B Overview
Gate drivers provides greater flexibilGate driversy to use the 8-CDIP (0.300, 7.62mm) package.A package of Tube has been used.A total of 2 drivers are integrated into its configuration.The device is mounted in the direction of Through Hole.When the supply voltage is 4.5V~18V it is able to demonstrate its superiority.N-Channel, P-Channel MOSFET is the gate type used for this design.In this device, temperatures must not exceed -55°C~125°C TA.Input type of Inverting, Non-Inverting is used.Its configuration starts with 8 terminations.The mount method is Through Hole.The pins are configured with 8 when designing the chip.A voltage of 15V is required for its operation.Its interface IC is BUFFER OR INVERTER BASED MOSFET DRIVER.An output current as high as 1.5A can be achieved at maximum power.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.A board with 8 component pins is available.Based on the maximum power dissipation of 640mW, it is clear that it is capable of transferring and conducting power losses without becoming overheated.Mosfet gate drivers is recommended to keep the supply current at 4.5mA to ensure greater stabilMosfet gate driversy.Gate drivers in this series are included in the Military, MIL-STD-883 series.
MAX4428MJA/883B Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 640mW
Operating with the supply voltage of Military, MIL-STD-883
MAX4428MJA/883B Applications
There are a lot of Maxim Integrated MAX4428MJA/883B gate drivers applications.
- Motor Drives
- UPS systems
- Multicolor LED/laser displays
- Solar power supplies
- LCD/LCoS/DLP portable and embedded pico projectors
- High-voltage isolated DC-DC converters
- Isolated Gate Driver Supplies
- Commercial and agricultural vehicles (CAV)
- High-speed communications
- High frequency line drivers
