MAX4429ESA
| Parameters | |
|---|---|
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 471mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 18V |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4429 |
| Pin Count | 8 |
| Max Output Current | 6A |
| Nominal Supply Current | 150μA |
| Output Current | 6A |
| Max Supply Current | 1.5mA |
| Input Type | Inverting |
| Rise Time | 25ns |
| Fall Time (Typ) | 25 ns |
| Rise / Fall Time (Typ) | 25ns 25ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Output Peak Current Limit-Nom | 6A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 6A 6A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
MAX4429ESA Overview
A higher degree of flexibility is achieved by adopting its 8-SOIC (0.154, 3.90mm Width) package.Gate drivers is packaged in the way of Tube.Configuration is supported by 1 drivers.In this case, gate drivers is mounted along the way of Surface Mount.When the supply voltage is 4.5V~18V it is able to demonstrate its superiority.The gate type on this device is N-Channel, P-Channel MOSFET.-40°C~85°C TA is the allowed temperature range for this device.Inverting is used as its input type.Initially, the configuration is composed of 8 terminations.Many related parts can be found under its base part number MAX4429.In this case, Surface Mount indicates how the device is mounted.During design, it is configured with 8 pins.Specification is for 18V supply voltage operation.Mosfet driver is equipped wMosfet driverh an interface chip BUFFER OR INVERTER BASED MOSFET DRIVER.An output current as high as 6A can be achieved at maximum power.Its subcategory of MOSFET Drivers contains various useful electronic components.The board has a total of 8 component pins.An output current of 6A is supported.The maximum power dissipation of 471mW shows its maximum capability to transfer and conduct power loss without overheating.For higher stability, the supply current should be kept at 1.5mA.
MAX4429ESA Features
Embedded in the Tube package
1 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 471mW
MAX4429ESA Applications
There are a lot of Maxim Integrated MAX4429ESA gate drivers applications.
- Commercial air-conditioning (CAC)
- Commercial and agricultural vehicles (CAV)
- High frequency line drivers
- Head-up and Head mounted displays
- Isolated Supplies for Motor Control
- Dual-Battery Systems
- Power factor correction (PFC) circuits
- Welding
- Telecom switch mode power supplies
- UPS systems
