MAX4429MJA/883B
| Parameters | |
|---|---|
| Max Power Dissipation | 640mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Max Output Current | 6A |
| Nominal Supply Current | 1.5mA |
| Max Supply Current | 1.5mA |
| Input Type | Inverting |
| Rise Time | 30ns |
| Fall Time (Typ) | 30 ns |
| Rise / Fall Time (Typ) | 25ns 25ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Output Peak Current Limit-Nom | 6A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 6A 6A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| RoHS Status | Non-RoHS Compliant |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-CDIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 1996 |
| Series | Military, MIL-STD-883 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | TIN LEAD |
| Subcategory | MOSFET Drivers |
MAX4429MJA/883B Overview
Its 8-CDIP (0.300, 7.62mm) package is adopted for higher flexibility.Tube is the packaging method.A total of 1 drivers are integrated into its configuration.There is a mounting bracket in the way of Through Hole.When the supply voltage is 4.5V~18V it is able to demonstrate its superiority.This gate type has a N-Channel, P-Channel MOSFET design.This device allows temperatures in the range of -55°C~125°C TA.Input type of Inverting is used.It's configured with 8 terminations.The mount method is Through Hole.There are 8 pins available in the device.Mosfet driver employs an interface chip called BUFFER OR INVERTER BASED MOSFET DRIVER as Mosfet drivers interface chip.The maximum output current can amount to 6A.There are several useful electronic components found in its subcategory of MOSFET Drivers.8 pins are present on the component.Based on its basis, it integrates 2 outputs.640mW dissipates maximum power without overheating, showing its maximum capability to transfer and conduct power loss.In order to ensure greater stability, it is recommended to keep the supply current at 1.5mA.A gate driver in this series is included in the Military, MIL-STD-883 series.
MAX4429MJA/883B Features
Embedded in the Tube package
1 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 640mW
Operating with the supply voltage of Military, MIL-STD-883
MAX4429MJA/883B Applications
There are a lot of Maxim Integrated MAX4429MJA/883B gate drivers applications.
- Industrial Power Supplies
- Solar inverters
- Industrial motor drives - compact, standard, premium, servo drives
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Motor Controls
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Topologies
- Welding
- UPS systems
- AC-DC Inverters
