MAX4430EUK-T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4430 |
| Pin Count | 5 |
| Operating Supply Voltage | 5.5V |
| Number of Circuits | 1 |
| Operating Supply Current | 11mA |
| Nominal Supply Current | 11mA |
| Output Current | 60mA |
| Slew Rate | 100V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 11μA |
| Voltage - Supply, Single/Dual (±) | 9V~11V ±4.5V~5.5V |
| Output Current per Channel | 60mA |
| Input Offset Voltage (Vos) | 1.25mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 180000 kHz |
| Voltage Gain | 125dB |
| Average Bias Current-Max (IIB) | 30μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 180MHz |
| Programmable Power | NO |
| Wideband | YES |
| Power | NO |
| Length | 2.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX4430EUK-T Overview
Packaged in a SC-74A, SOT-753 case, the buffer op amp is ready to use. An op amp ic of the Voltage Feedback type. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. It is estimated that there will be 5 terminations in the next few months. A total of 5 pins are attached to buffer op amp. This linear amplifier should be powered by an 5V battery. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. An 5-pin op amp ic is included in the package. Regarding input offset voltage, buffer amplifier rates 1.25mV voltage. This electronic component is recommended to be mounted using the mounting type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . Using a supply current of 11mA , this buffer op amp will be able to operate. Keeping the voltage gain at 125dB is the best course of action. There are 1 circuits on this op amp. The operating supply voltage of instrumentation amplifier is rated 5.5V voltage.
MAX4430EUK-T Features
5 Pins
supply voltage of 5V
125dB voltage gain
MAX4430EUK-T Applications
There are a lot of Maxim Integrated MAX4430EUK-T Instrumentational OP Amps applications.
- Tablets
- Professional videography
- Voltage regulation circuit
- Portable docking station
- Television
- Video conversion and routing
- Band-stop filter
- Image computer boards
- Laptop
- Wireless base stations
