MAX4453ESA+T
| Parameters | |
|---|---|
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX4453 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Number of Circuits | 2 |
| Operating Supply Current | 620μA |
| Slew Rate | 95V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 800nA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.25V |
| Output Current per Channel | 22mA |
| Input Offset Voltage (Vos) | 400μV |
| Unity Gain BW-Nom | 30000 kHz |
| Voltage Gain | 80dB |
| Average Bias Current-Max (IIB) | 3μA |
| Power Supply Rejection Ratio (PSRR) | 60dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 200MHz |
| Programmable Power | NO |
| Wideband | YES |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifiers |
| Packing Method | TAPE AND REEL |
| Max Power Dissipation | 471mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
MAX4453ESA+T Overview
In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. An op amp ic of the Voltage Feedback type. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. There have been a total of 8 terminations over the past year. Buffer amplifier has a total of 8 pins on it. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifiers device. It has 8 pins that make up the linear amplifier. Op amp ic rates 400μV for input offset voltage. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . An 620μA volt supply current is needed for this linear amplifier to operate. The voltage gain should stay at 80dB. There are 2 circuits on op amps. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. The operating supply voltage of the buffer op amp is rated at 5V. An buffer amplifier is packed in a TAPE AND REEL-shape according to the design.
MAX4453ESA+T Features
8 Pins
supply voltage of 5V
80dB voltage gain
Output Type: Rail-to-Rail
MAX4453ESA+T Applications
There are a lot of Maxim Integrated MAX4453ESA+T Instrumentational OP Amps applications.
- Portable docking station
- Large motor controllers
- Biopotential
- Integrator circuits
- Car stereo
- PDA
- earphone
- Video amplifiers
- Blood pressure sensors
- Broadcasting
