MAX4460ETT+T
| Parameters | |
|---|---|
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Max Power Dissipation | 1.454W |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4460 |
| Pin Count | 6 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Number of Circuits | 1 |
| Operating Supply Current | 800μA |
| Nominal Supply Current | 1.1mA |
| Slew Rate | 0.5V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2.85V~5.25V |
| Output Current per Channel | 150mA |
| Input Offset Voltage (Vos) | 100μV |
| Gain Bandwidth Product | 2.5MHz |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| -3db Bandwidth | 2.5MHz |
| Voltage Gain-Min | 1 |
| Voltage Gain-Nom | 10 |
| Non-linearity-Max | 0.25% |
| Voltage Gain-Max | 100 |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-WDFN Exposed Pad |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
MAX4460ETT+T Overview
In the package, you will find a 6-WDFN Exposed Pad-case to contain the op amp ic. This is a Instrumentation type op amp. A Tape & Reel (TR) case is used for delivering the op amp. During the past two weeks, there have been close to 6 terminations. It consists of a total of 6 pins in total. It is important to remember that this op amp should be operated at a voltage of 5V volts. Linear amplifier includes 6 pins. With regards to the offset voltage of the input, buffer amplifier is rated at 100μV. For this electrical component, Surface Mount is the recommended mounting type. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. As long as the supply current of the chip does not exceed 800μA, this op amp ic can operate. A instrumentation amplifier like this has 1 circuits. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. The operating supply voltage of the buffer op amp is rated at 5V. This op amp ic can conduct a minimum voltage gain of 1.
MAX4460ETT+T Features
6 Pins
supply voltage of 5V
Output Type: Rail-to-Rail
MAX4460ETT+T Applications
There are a lot of Maxim Integrated MAX4460ETT+T Instrumentational OP Amps applications.
- High speed sample
- RF cable systems
- Voltage regulation circuit
- Automotive sensors
- Thermocouples
- Signal operation
- Radar
- Portable electronic products powered by batteries
- Computer workstations
- Wireless base stations
