MAX4461TETT+T
| Parameters | |
|---|---|
| Min Operating Temperature | -40°C |
| Subcategory | Instrumentation Amplifier |
| Max Power Dissipation | 470mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Pin Count | 6 |
| Operating Supply Voltage | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 2.85V |
| Operating Supply Current | 800μA |
| Nominal Supply Current | 1.1mA |
| Slew Rate | 0.5 V/μs |
| Amplifier Type | INSTRUMENTATION AMPLIFIER |
| Common Mode Rejection Ratio | 90 dB |
| Output Current per Channel | 150mA |
| Input Offset Voltage (Vos) | 100μV |
| Gain Bandwidth Product | 2.5MHz |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| -3db Bandwidth | 250 kHz |
| Input Bias Current | 1pA |
| Voltage Gain-Min | 1 |
| Voltage Gain-Nom | 10 |
| Non-linearity-Max | 0.25% |
| Voltage Gain-Max | 100 |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Number of Pins | 6 |
| Packaging | Strip |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 85°C |
MAX4461TETT+T Overview
The instrumentation amplifier in this picture is of the INSTRUMENTATION AMPLIFIER-type. In the case of Strip cases, linear amplifier will be delivered. It is estimated that there will be at least 6 terminations this year. In total, there are 6 pins on this op amp ic. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. To be specific, this instrumentation amplifier is a type of Instrumentation Amplifier. There are 6 pins on this chip. Regarding input offset voltage, buffer amplifier rates 100μV voltage. It is possible to operate this buffer amplifier from a supply current of 800μA . As far as the device is concerned, buffer amplifier has 1 channels. This op amp needs to be operated at a temperature of not less than -40°C degrees Celsius in order to function properly. A temperature greater than 85°C should not be used for the operation of buffer amplifier. The operating supply voltage of instrumentation amplifier is rated 5V voltage. With regard tp supply voltage, op amp is used under 5.25V. It is advised to keep the op amp's supply voltage higher than 2.85V. To conduct electronic part voltage gain higher than 1.
MAX4461TETT+T Features
6 Pins
supply voltage of 5V
MAX4461TETT+T Applications
There are a lot of Maxim Integrated MAX4461TETT+T Instrumentational OP Amps applications.
- Cinema or auditorium audio system
- Switching amplifier
- Biopotential
- Logarithmic operation circuits
- Instrumentation
- Semiconductor detectors
- Car stereo
- Ultrasound transducers
- Power transmission
- Exponential operation circuits
