MAX4462TESA
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Max Power Dissipation | 470mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4462 |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Number of Circuits | 1 |
| Operating Supply Current | 800μA |
| Nominal Supply Current | 1.1mA |
| Slew Rate | 0.5V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2.85V~5.25V ±1.425V~2.125V |
| Output Current per Channel | 150mA |
| Input Offset Voltage (Vos) | 100μV |
| Gain Bandwidth Product | 2.5MHz |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| -3db Bandwidth | 250kHz |
| Voltage Gain-Min | 1 |
| Voltage Gain-Nom | 10 |
| Non-linearity-Max | 0.25% |
| Voltage Gain-Max | 100 |
| Length | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
MAX4462TESA Overview
In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. The instrumentation amplifier in this picture is of the Instrumentation-type. The op amp is delivered to you in a Tube case. There have been a total of 8 terminations over the past year. It consists of a total of 8 pins in total. It is important to remember that this op amp should be operated at a voltage of 5V volts. The input offset voltage is 100μV. Surface Mount is the recommended mounting type for this linear amplifier. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. The buffer amplifier is capable of operating from a supply current of 800μA . The buffer amp consists of 1 circuits in total. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. The operating supply voltage of instrumentation amplifier is rated 5V voltage. This op amp ic can conduct a minimum voltage gain of 1.
MAX4462TESA Features
8 Pins
supply voltage of 5V
Output Type: Rail-to-Rail
MAX4462TESA Applications
There are a lot of Maxim Integrated MAX4462TESA Instrumentational OP Amps applications.
- Thermocouples
- Addition operation circuits
- Scintillation detectors
- Oscilloscopes
- Automation control systems
- Signal operation
- Multiplication circuits
- Tablets
- Vehicle electronics
- Radiation thermometry transducers
