MAX4462UESA
| Parameters | |
|---|---|
| Non-linearity-Max | 0.25% |
| Voltage Gain-Max | 100 |
| Length | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Max Power Dissipation | 470mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4462 |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Number of Circuits | 1 |
| Operating Supply Current | 800μA |
| Nominal Supply Current | 1.1mA |
| Slew Rate | 0.5V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2.85V~5.25V ±1.425V~2.125V |
| Output Current per Channel | 150mA |
| Input Offset Voltage (Vos) | 100μV |
| Gain Bandwidth Product | 2.5MHz |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| -3db Bandwidth | 2.5MHz |
| Voltage Gain-Min | 1 |
| Voltage Gain-Nom | 10 |
MAX4462UESA Overview
Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. The instrumentation amplifier in this picture is of the Instrumentation-type. Linear amplifier is delivered in a Tube case. There have been a total of 8 terminations over the past year. Linear amplifier has a total of 8 pins. Please take in mind that this instrumentation amplifier should be run at 5V. Regarding input offset voltage, op amp rates 100μV. The mounting type that is recommended for this electrical part is Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~85°C . Using a supply current of 800μA , this buffer op amp will be able to operate. There are 1 circuits on op amps. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. The operating supply voltage of instrumentation amplifier is rated 5V voltage. In this op amp ic, the minimum voltage gain is 1.
MAX4462UESA Features
8 Pins
supply voltage of 5V
Output Type: Rail-to-Rail
MAX4462UESA Applications
There are a lot of Maxim Integrated MAX4462UESA Instrumentational OP Amps applications.
- Signal operation
- Precision measurement
- Weak signal detection
- Proportional operation circuits
- Radar
- Power generator
- Hand-held batteries
- Comparator
- Inverse/same-phase proportional circuit
- Displayers for aircraft and air transportation control systems
