MAX4478AUD/V+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4478 |
| Output Type | Rail-to-Rail |
| Power Supplies | 3/5V |
| Number of Circuits | 4 |
| Nominal Supply Current | 2.2mA |
| Output Current | 48mA |
| Current - Supply | 2.5mA |
| Slew Rate | 3V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V ±1.35V~2.75V |
| Input Offset Voltage (Vos) | 350μV |
| Gain Bandwidth Product | 10MHz |
| Unity Gain BW-Nom | 10000 kHz |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.00015μA |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 70μV |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.00015μA |
| Programmable Power | NO |
| Wideband | NO |
| Power | NO |
| Height Seated (Max) | 1.1mm |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX4478AUD/V+T Overview
A 14-TSSOP (0.173, 4.40mm Width) case is used to package the op amp. There are two types of operational amplifiers in this circuit. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. There have been a total of 14 terminations over the past year. It is important to remember that this op amp should be operated at a voltage of 5V volts. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. 14 pins are available on the instrumentation amplifier. The input offset voltage is 350μV. For this electronic part, it is recommended that you mount it with type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . Voltage gain should remain at 120dB. The buffer amp consists of 4 circuits in total. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. This linear amplifier pack is based on the TAPE AND REEL axis. As a recommendation, this electronic component should be used with a power supply that can deliver 2.5mA. The Automotive, AEC-Q100 indicates the series number of the op amp.
MAX4478AUD/V+T Features
supply voltage of 5V
120dB voltage gain
Output Type: Rail-to-Rail
MAX4478AUD/V+T Applications
There are a lot of Maxim Integrated MAX4478AUD/V+T Instrumentational OP Amps applications.
- Computer workstations
- Automation control systems
- Power control
- Differentiator circuits
- MP3
- High gain DC amplifier
- Professional videography
- Navigation
- Cinema or auditorium audio system
- Addition operation circuits
