MAX4489AUA+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifiers |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4489 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Circuits | 2 |
| Operating Supply Current | 2.5mA |
| Nominal Supply Current | 2.2mA |
| Output Current | 48mA |
| Slew Rate | 10V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V ±1.35V~2.75V |
| Output Current per Channel | 48mA |
| Input Offset Voltage (Vos) | 70μV |
| Bandwidth | 42MHz |
| Unity Gain BW-Nom | 42000 kHz |
| Voltage Gain | 120dB |
| Low-Offset | YES |
| Frequency Compensation | YES AVCL>=5 |
| Supply Voltage Limit-Max | 6V |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Power | NO |
| Number of Amplifiers | 1 |
| Length | 3mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
MAX4489AUA+T Overview
In order to protect the op amps, a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case is used. General Purpose-type instrumentation amplifiers are used in this application. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. Buffer amplifier has a total of 8 pins. Please take in mind that op amp should be run at 5V. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifiers device. The buffer op amp includes 8 pins. There is an input offset voltage of 70μV for this buffer op amp. The mounting type that is recommended for this electrical part is Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~125°C . Using a supply current of 2.5mA , this buffer op amp will be able to operate. 120dB should remain the voltage gain. During the manufacturing process, this buffer amplifier is divided into 2 circuits. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. For the packing of the instrumentation amplifier, TAPE AND REEL is adopted. On the linear amplifier, there are 1 amplifiers.
MAX4489AUA+T Features
8 Pins
supply voltage of 5V
120dB voltage gain
Output Type: Rail-to-Rail
MAX4489AUA+T Applications
There are a lot of Maxim Integrated MAX4489AUA+T Instrumentational OP Amps applications.
- High gain DC amplifier
- Industrial applications including automation
- Fast A/D and D/A converters
- Cinema or auditorium audio system
- Communication device
- pH (acidity)
- Test equipment
- Differentiator circuits
- Television
- High input resistance broadband
