banner_page

MAX4503EPA

150ns, 100ns SPST - NO 250Ohm DUAL Analog Switches 8 Pins 1nA 5V 8-DIP (0.300, 7.62mm)


  • Manufacturer: Rochester Electronics, LLC
  • Nocochips NO: 699-MAX4503EPA
  • Package: 8-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 334
  • Description: 150ns, 100ns SPST - NO 250Ohm DUAL Analog Switches 8 Pins 1nA 5V 8-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Mounting Type Through Hole
Package / Case 8-DIP (0.300, 7.62mm)
Surface Mount NO
Operating Temperature -40°C~85°C TA
Packaging Tube
JESD-609 Code e0
Pbfree Code no
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
Terminal Finish TIN LEAD
Technology CMOS
Terminal Position DUAL
Peak Reflow Temperature (Cel) 240
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 2.54mm
Time@Peak Reflow Temperature-Max (s) 20
Pin Count 8
JESD-30 Code R-PDIP-T8
Supply Voltage-Min (Vsup) 1V
Number of Channels 1
Number of Circuits 1
Neg Supply Voltage-Nom (Vsup) -5V
On-State Resistance (Max) 250Ohm
Multiplexer/Demultiplexer Circuit 1:1
Off-state Isolation-Nom 90 dB
Current - Leakage (IS(off)) (Max) 1nA
Channel Capacitance (CS(off), CD(off)) 3pF 3pF
Switch Circuit SPST - NO
Switch Time (Ton, Toff) (Max) 150ns, 100ns
Charge Injection 1pC
Voltage - Supply, Dual (V±) ±1V~6V
Height Seated (Max) 4.572mm
Length 9.375mm
Width 7.62mm
RoHS Status Non-RoHS Compliant

MAX4503EPA Overview


Shipping overseas is convenient with the electronic component packed in 8-DIP (0.300, 7.62mm). This high-reliability packaging method uses advanced packaging methods Tube. There is an analog multiplexer mounted in position Through Hole. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. The operating temperature is extended to around -40°C~85°C TA. Total terminations are 8. High-quality output is provided by the electronic component's 1 channels. It is safe to turn on and run the electronic component with a 5V voltage supply. The electrical component body receives 8 pins. A SPST - NO switching circuit is used for these analog switches. A total of 1 circuits make up this switch device. Providing the analog switch ic with electricity requires a minimum voltage of 1V.

MAX4503EPA Features


1 Channels
Switch Circuit: SPST - NO

MAX4503EPA Applications


There are a lot of Rochester Electronics, LLC MAX4503EPA Analog Switches & Multiplexers ICs applications.

  • DSLAMs
  • SONET
  • RGB switches
  • Medical Instrumentation
  • Audio and video switching
  • Battery-powered systems
  • Modems
  • Signal routing between systems
  • Avionics test equipment
  • New designs requiring multiplexer functions

Write a review

Note: HTML is not translated!
    Bad           Good