MAX4503EPA
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 250Ohm |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4503 |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T8 |
| Qualification Status | Not Qualified |
| Power Supplies | +-3/+-5V |
| Supply Voltage-Min (Vsup) | 1V |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Operating Supply Current | 40μA |
| Number of Bits | 2 |
| Throw Configuration | SPST |
| Supply Type | Dual |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| On-State Resistance (Max) | 250Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 90 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 3pF 3pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 150ns, 100ns |
| Charge Injection | 1pC |
| Switching | BREAK-BEFORE-MAKE |
| Normal Position | NO |
| Voltage - Supply, Dual (V±) | ±1V~6V |
| Length | 9.375mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX4503EPA Overview
The electrical component comes in 8-DIP (0.300, 7.62mm) packaging, which makes it convenient to ship overseas. High reliability is achieved by using advanced packaging method Tube. In Through Hole, this analog switch is mounted. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. An extended operating temperature of -40°C~85°C TA degrees Celsius. There are 8 terminations totally. This electronic part offers high-quality output due to its 1 channels. When the electronic component is given a voltage of 5V, it should be turned on and run. There are 8 pins injected into the electronic part body. Multiplexers built on a SPST - NO switching circuit are built. The multiplexer consists of 1 circuits. Try searching with MAX4503 if you're looking for variants. Analog switches have 250Ohm internal resistance. Multiplexer or Switches is a typical switch device. Analogue multiplexer with a Dual supply type that is cost-effective. The switch device would be able to operate with 40μA current. It is able to conduct in a 2-bit way. To power the multiplexer ics, the voltage must be set at 1V.
MAX4503EPA Features
1 Channels
Switch Circuit: SPST - NO
40μA Supply Current
2-Bit
MAX4503EPA Applications
There are a lot of Maxim Integrated MAX4503EPA Analog Switches & Multiplexers ICs applications.
- Battery Powered Systems
- Fiber In The Loop (FITL)
- Fiber to the Home
- Battery-powered systems
- Sample-and-hold systems
- Digital Cross-Connects
- Medical systems
- Microwave transmission systems
- Microprocessor controlled systems
- Sample hold systems
