MAX4504CUK+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 250Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 571mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4504 |
| Pin Count | 5 |
| Operating Supply Voltage | 5V |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Operating Supply Current | 1μA |
| Nominal Supply Current | 40μA |
| Max Supply Current | 125μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 150 ns |
| Supply Type | Dual |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 100 ns |
| Max Dual Supply Voltage | 6V |
| On-State Resistance (Max) | 250Ohm |
| Min Dual Supply Voltage | 1V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 90 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 3pF 3pF |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 150ns, 100ns |
| Charge Injection | 1pC |
| Switching | BREAK-BEFORE-MAKE |
| Normal Position | NC |
| Voltage - Supply, Dual (V±) | ±1V~6V |
| Length | 2.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX4504CUK+T Overview
Due to its SC-74A, SOT-753 packaging, the electronic part is convenient for international shipping. High reliability is ensured by the advanced packaging method Tape & Reel (TR). The multiplexer is located in Surface Mount. 1:1 is the ratio between multiplexers and demultiplexers. Around 0°C~70°C TA is the extended operating temperature. The total number of terminations is 5. The electronic part delivers high-quality output through its 1 channels. Turning on and running the electrical part should be easy with a 5V voltage supply. It is injected into the electrical part body with 5 pins. Based on SPST - NC switching circuits, these analog multiplexers work. It consists of 1 circuits. Use MAX4504 to search for variants of the digital switches. An switch multiplexer with 250Ohm internal resistance has a value of 250Ohm. The functions of 5 pins can be found in the datasheets. This switch device is a typical Multiplexer or Switches. Analogue multiplexers of the Dual supply type that are cost-effective. For this digital switch to work, 1μA current would suffice. When the digital multiplexer is charged above 125μA, damage can occur. Despite this switch's dual supply capability, its voltage should not exceed 6V. You should attach at least 1V voltage if you are using dual power supply. The electrical part can be operated at 5V voltage levels.
MAX4504CUK+T Features
1 Channels
Switch Circuit: SPST - NC
1μA Supply Current
MAX4504CUK+T Applications
There are a lot of Maxim Integrated MAX4504CUK+T Analog Switches & Multiplexers ICs applications.
- Audio and video switching
- Isolation
- Audio and video routing
- Medical systems
- USB 1.1 signal switching circuits
- SONET
- Digital access cross connects
- SONET/SDH ADM
- Microprocessor controlled systems
- Precision instrumentation
