MAX4504EUK-T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Resistance | 250Ohm |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 571mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4504 |
| Pin Count | 5 |
| Operating Supply Voltage | 5V |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Operating Supply Current | 40μA |
| Nominal Supply Current | 40μA |
| Max Supply Current | 125μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 150 ns |
| Supply Type | Dual |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 100 ns |
| Max Dual Supply Voltage | 6V |
| On-State Resistance (Max) | 250Ohm |
| Min Dual Supply Voltage | 1V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 90 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 3pF 3pF |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 150ns, 100ns |
| Charge Injection | 1pC |
| Switching | BREAK-BEFORE-MAKE |
| Normal Position | NC |
| Voltage - Supply, Dual (V±) | ±1V~6V |
| Length | 2.9mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
MAX4504EUK-T Overview
Shipping overseas is convenient due to the electrical component's packing in SC-74A, SOT-753. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). Multiplexers like this are mounted in the Surface Mount position. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Temperatures around -40°C~85°C TA are extended for operation. In total, there have been 5 terminations. Due to its 1 channels, the electrical component produces high-quality output. With a 5V voltage supply, the electrical component should be turned on and run. A total of 5 pins are injected into the body of the electronic part. Unlike digital switches, these are based on SPST - NC switching circuits. There are 1 circuits in this multiplexer. Use MAX4504 to search for variants of the digital switches. In this multiplexer, the internal resistance is 250Ohm. Please refer to the datasheets for 5 pins functions. In this analog multiplexer, the value is Multiplexer or Switches. A analog switch ic that has a cost-effective Dual supply type. 40μA current would be enough for this multiplexer to operate. When the digital multiplexer is charged above 125μA, damage can occur. Despite this switch device's dual supply capability, its voltage should not exceed 6V. You should attach at least 1V voltage if you are using dual power supply. A voltage of 5V can be used to operate the electronic component.
MAX4504EUK-T Features
1 Channels
Switch Circuit: SPST - NC
40μA Supply Current
MAX4504EUK-T Applications
There are a lot of Maxim Integrated MAX4504EUK-T Analog Switches & Multiplexers ICs applications.
- DSUs
- Digital cross connects (DSX-1)
- Communication systems
- Audio and video signal routing
- Microwave transmission systems
- E1 Network Equipment
- New designs requiring multiplexer functions
- Industrial
- 65 V DACs
- Remote Powered Equipment
