MAX4504EUK+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4504 |
| Pin Count | 5 |
| JESD-30 Code | R-PDSO-G5 |
| Qualification Status | Not Qualified |
| Power Supplies | +-3/+-5V |
| Supply Voltage-Min (Vsup) | 1V |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Supply Current-Max (Isup) | 0.2mA |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| On-State Resistance (Max) | 250Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 90 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 3pF 3pF |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 150ns, 100ns |
| Charge Injection | 1pC |
| Switching | BREAK-BEFORE-MAKE |
| Normal Position | NC |
| Voltage - Supply, Dual (V±) | ±1V~6V |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
MAX4504EUK+T Overview
Packed in SC-74A, SOT-753, the electronic component is convenient for shipping overseas. High reliability is achieved by using advanced packaging method Tape & Reel (TR). It is mounted in the position Surface Mount. Multiplexer and demultiplexer circuits have a number 1:1. Operating temperature around -40°C~85°C TA extended. Total terminations are 5. As a result of its 1 channels, this electronic component provides high-quality output. Turning on and running the electrical part should be easy with a 5V voltage supply. The electronic part body is injected with 5 pins. Multiplexers built on a SPST - NC switching circuit are built. It consists of 1 circuits. Look for analog switch ic variants by searching with MAX4504. Theswitch device is a typical Multiplexer or Switches. This analog switch ic needs a voltage of 1V as its minimum supply voltage.
MAX4504EUK+T Features
1 Channels
Switch Circuit: SPST - NC
MAX4504EUK+T Applications
There are a lot of Maxim Integrated MAX4504EUK+T Analog Switches & Multiplexers ICs applications.
- Central office
- Avionics test equipment
- Isolation
- PDH Multiplexers
- Battery-powered systems
- Modems
- Audio/video switches
- Avionics and Military Systems
- Audio and video routing
- Data Acquisition Systems
