MAX4513EPE+
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 160Ohm |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| JESD-30 Code | R-PDIP-T16 |
| Qualification Status | Not Qualified |
| Power Supplies | 12/+-15V |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| Voltage - Supply, Single/Dual (±) | 9V~36V ±4.5V~18V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 160Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 62 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 10pF 5pF |
| On-state Resistance Match-Nom | 3Ohm |
| Switch Circuit | SPST - NO/NC |
| Switch Time (Ton, Toff) (Max) | 500ns, 400ns |
| Charge Injection | 1.5pC |
| Channel-to-Channel Matching (ΔRon) | 3 Ω (Typ) |
| Crosstalk | -66dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 500ns |
| Length | 19.175mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
MAX4513EPE+ Overview
Shipping overseas is convenient due to the electrical component's packing in 16-DIP (0.300, 7.62mm). A high level of reliability can be achieved through the use of an advanced packaging method Tube. In Through Hole, you'll find this switch device. Multiplexers and demultiplexers have the same number of circuits 1:1. Extended operating temperature around -40°C~85°C. In total, 16 terminations have occurred. This electronic part offers high-quality output due to its 1 channels. Powered by a 15V voltage supply, the electrical part should be switched on and run. This electrical component is included in the 16 series of products. Circuits based on SPST - NO/NC switching are used to construct these analog switch ics. 4 circuits are used in this analogue multiplexer. It has an internal resistance of 160Ohm. This switch device is a typical Multiplexer or Switches. In this switch multiplexer, there are SEPARATE OUTPUT outputs available.
MAX4513EPE+ Features
1 Channels
Switch Circuit: SPST - NO/NC
MAX4513EPE+ Applications
There are a lot of Maxim Integrated MAX4513EPE+ Analog Switches & Multiplexers ICs applications.
- 65 V DACs
- Microprocessor Controlled Analog Systems
- Channelized and Unchannelized DS3 applications
- Medical Instrumentation
- Precision instrumentation
- Precision test equipment
- E1 Multiplexer
- E1 Network Equipment
- ISDN NT1/TA
- Multi-Line E1 Interface Cards
