Parameters |
Supply Voltage |
15V |
Terminal Pitch |
1.27mm |
Time@Peak Reflow Temperature-Max (s) |
20 |
Base Part Number |
MAX4513 |
Output |
SEPARATE OUTPUT |
Pin Count |
16 |
JESD-30 Code |
R-PDSO-G16 |
Operating Supply Voltage |
15V |
Number of Channels |
1 |
Number of Circuits |
4 |
Max Supply Voltage |
36V |
Min Supply Voltage |
9V |
Nominal Supply Current |
280μA |
Max Supply Current |
400μA |
Throw Configuration |
SPST |
Turn On Delay Time |
1 μs |
Voltage - Supply, Single/Dual (±) |
9V~36V ±4.5V~18V |
Supply Type |
Dual, Single |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Turn-Off Delay Time |
900 ns |
Max Dual Supply Voltage |
18V |
On-State Resistance (Max) |
160Ohm |
Min Dual Supply Voltage |
4.5V |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
62 dB |
Current - Leakage (IS(off)) (Max) |
500pA |
Channel Capacitance (CS(off), CD(off)) |
10pF 5pF |
On-state Resistance Match-Nom |
3Ohm |
Switch Circuit |
SPST - NO/NC |
Switch Time (Ton, Toff) (Max) |
500ns, 400ns |
Charge Injection |
1.5pC |
Crosstalk |
-66dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
500ns |
Height Seated (Max) |
1.75mm |
Length |
9.9mm |
Width |
3.9mm |
Radiation Hardening |
No |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
Published |
2002 |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
160Ohm |
Terminal Finish |
Tin/Lead (Sn85Pb15) |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
696mW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
240 |
Number of Functions |
4 |
MAX4513ESE Overview
Packed in 16-SOIC (0.154, 3.90mm Width), the electronic component is convenient for shipping overseas. High reliability is ensured by the advanced packaging method Tube. It is mounted in the position Surface Mount. 1:1 is the number of circuits in the multiplexer and demultiplexer. Operation at a temperature around -40°C~85°C TA. The total number of terminations is 16. By its 1 channels, the electronic component provides high-quality output. Turning on and running the electrical part should be easy with a 15V voltage supply. An injection of 16 pins is performed into the body of the electrical component. Multiplexers built on a SPST - NO/NC switching circuit are built. There are 4 circuits in this multiplexer. Look for analog switch ic variants by searching with MAX4513. A 160Ohm internal resistance characterizes this multiplexer. The analogue multiplexer in this example is a typical Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 36V. Digital switch that provides Dual, Single power at a cost-effective price. It is recommended that the electrical component receives a voltage of 9V. Put voltage above 400μA on the multiplexer to cause damage. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 18V. You should attach at least 4.5V voltage if you are using dual power supply. The digital multiplexer has SEPARATE OUTPUT outputs that can be used. 15V operating voltages are supported by the electronic component.
MAX4513ESE Features
1 Channels
Switch Circuit: SPST - NO/NC
MAX4513ESE Applications
There are a lot of Maxim Integrated MAX4513ESE Analog Switches & Multiplexers ICs applications.
- Communications systems
- Digital Cross-Connects
- Communication systems
- Isolation
- Microprocessor controlled systems
- Battery Powered Instruments
- PCMCIA cards
- Industrial and process control systems
- Transmit
- PDH Multiplexers