Parameters |
Package / Case |
16-SSOP (0.154, 3.90mm Width) |
Number of Pins |
16 |
Operating Temperature |
0°C~70°C TA |
Packaging |
Tube |
Published |
1999 |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
100Ohm |
Max Power Dissipation |
762mW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
240 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.635mm |
Time@Peak Reflow Temperature-Max (s) |
20 |
Base Part Number |
MAX4518 |
Pin Count |
16 |
Power Supplies |
3/5/+-5V |
Number of Channels |
4 |
Number of Circuits |
1 |
Max Supply Voltage |
15V |
Min Supply Voltage |
2.7V |
Operating Supply Current |
1μA |
Throw Configuration |
4PST |
Propagation Delay |
150 ns |
Turn On Delay Time |
500 ns |
Logic Function |
Multiplexer |
Voltage - Supply, Single/Dual (±) |
2V~15V ±2.7V~8V |
Supply Type |
Dual, Single |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Turn-Off Delay Time |
400 ns |
Max Dual Supply Voltage |
8V |
On-State Resistance (Max) |
100Ohm |
Min Dual Supply Voltage |
2.7V |
Multiplexer/Demultiplexer Circuit |
4:1 |
Off-state Isolation-Nom |
75 dB |
Current - Leakage (IS(off)) (Max) |
100pA |
Channel Capacitance (CS(off), CD(off)) |
5pF 16pF |
On-state Resistance Match-Nom |
4Ohm |
Switch Circuit |
SP4T |
Switch Time (Ton, Toff) (Max) |
150ns, 150ns |
Charge Injection |
5pC (Max) |
Channel-to-Channel Matching (ΔRon) |
4 Ω (Max) |
Crosstalk |
-92dB @ 100kHz |
Switching |
BREAK-BEFORE-MAKE |
Height |
1.55mm |
Length |
4.98mm |
Width |
3.99mm |
Radiation Hardening |
No |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
MAX4518CEE Overview
The electrical component comes in 16-SSOP (0.154, 3.90mm Width) packaging, which makes it convenient to ship overseas. The advanced packaging method Tube provides high reliability. The multiplexer is located in Surface Mount. In the multiplexer and demultiplexer, 4:1 represents the number of circuits. Extended operating temperature around 0°C~70°C TA. Total terminations are 16. Due to its 4 channels, the electrical component produces high-quality output. A 5V voltage supply should turn on and run the electronic component. 16 pins are injected to the electronic part body. Circuits based on SP4T switching are used to construct these analog switch ics. A 1 circuit is present in this switch device. Try searching with MAX4518 to find analog multiplexer variants. A 100Ohm internal resistance characterizes this multiplexer. The datasheets for the 16 pins explain the functions. In a normalsituation, users should not supply the switches with voltage higher than 15V. Digital switch that provides Dual, Single power at a cost-effective price. The lowest voltage the electronic part should receive is 2.7V. 1μA current would be enough for this multiplexer to operate. Despite this switch device's dual supply capability, its voltage should not exceed 8V. In the case of dual power supplies, you should connect at least 2.7V.
MAX4518CEE Features
4 Channels
Switch Circuit: SP4T
1μA Supply Current
MAX4518CEE Applications
There are a lot of Maxim Integrated MAX4518CEE Analog Switches & Multiplexers ICs applications.
- High reliability control systems
- Residential Gateways, Home Gateway/Router
- Frame Relay Equipment
- Channel Banks
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Cable PC
- Signal routing between systems
- SONET
- Optical Applications
- USB 1.1 signal switching circuits