MAX4518CEE+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1999 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 100Ohm |
| Terminal Finish | Tin (Sn) |
| Max Power Dissipation | 762mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4518 |
| Pin Count | 16 |
| Operating Supply Voltage | 12V |
| Power Supplies | 3/5/+-5V |
| Number of Channels | 4 |
| Number of Circuits | 1 |
| Max Supply Voltage | 15V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 1μA |
| Propagation Delay | 150 ns |
| Turn On Delay Time | 500 ns |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 2V~15V ±2.7V~8V |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 400 ns |
| Max Dual Supply Voltage | 8V |
| On-State Resistance (Max) | 100Ohm |
| Min Dual Supply Voltage | 2.7V |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 75 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 16pF |
| On-state Resistance Match-Nom | 4Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 150ns, 150ns |
| Charge Injection | 5pC (Max) |
| Channel-to-Channel Matching (ΔRon) | 4 Ω (Max) |
| Crosstalk | -92dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX4518CEE+T Overview
As the electronic part is packed in 16-SSOP (0.154, 3.90mm Width), international shipping is convenient. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). Surface Mount is where this multiplexer is located. Multiplexers and demultiplexers have a ratio of 4:1. An extended operating temperature of 0°C~70°C TA degrees Celsius. There are 16 terminations totally. High-quality output is provided by the electronic component's 4 channels. A 5V voltage supply should turn on and run the electronic component. Electronic part bodies are injected with 16 pins. On the other hand, analog switches can be constructed using SP4T switching circuits. The circuits in this analogue multiplexer number 1. Look for analog switch ic variants by searching with MAX4518. This digital multiplexer has 100Ohm internal resistance. For details about the functions of 16 pins, please refer to the datasheets. Multiplexers should not be powered above 15V in normal situations. Digital switch that provides Dual, Single power at a cost-effective price. There should be 2.7V voltage fed to the electrical part below 2.7V. 1μA current would be enough for this multiplexer to operate. Despite this switch's dual supply capability, its voltage should not exceed 8V. In the case of dual power supplies, you should connect at least 2.7V. The electronic component can function from 12V.
MAX4518CEE+T Features
4 Channels
Switch Circuit: SP4T
1μA Supply Current
MAX4518CEE+T Applications
There are a lot of Maxim Integrated MAX4518CEE+T Analog Switches & Multiplexers ICs applications.
- Switching Systems
- Digital cross connects (DSX-1)
- Access Concentrators
- SONET/SDH ADM
- Video signal routing
- Industrial control systems
- Routers
- Modems
- Mechanical reed relay replacement
- Communication systems
